 |
| Quantity: | |
|---|---|
TQC250-2CL
1. Machine Purpose:
The equipment is used for the backhoe processing of angle steel by using the principle of common milling.
2. Main Technical Specifications：
1) Power supply: 3-phase AC440V, 50 Hz.
2) Power: 9 .2kw
3) Shape parameter: About 2200x1700x1800mm
4) Spindle speed: 390r / min
5) Spindle number: 2
6) Shaft spacing: 320mm
7) Automatic feed speed: 100 ~ 650mm / min ( (automatic adjustment)
8) The shortest workpiece length : 350mm
9) Maximum processing angle steel model: Ll250x24
10) Cooling mode: Air cooling (0 . 6MPa）
3. List of the Key Outsourced Components:
NO. | Name | Model | Quantity | Brand |
1 | Flat cutter head | D100 | 1 | QTMT |
2 | Arc cutter head | D100.5 | 1 | QTMT |
3 | Spindle motor | Y132M-8 | 2 | Kaiyuan |
4 | Gear motor | NMRV050-NMRV110 | 2 | WANJIE |
5 | Hydraulic station | 1 | Jinan | |
6 | Slide block | HGW35CA | 12 | HIWIN |
7 | Programmable controller | XC2-42R-E | 1 | XINJE |
8 | Text display | OP320-A | 1 | XINJE |
9 | Frequency converter | HD09-4T1P5G | 1 | HAMANT |
10 | Main electrical components | CHNT |
Note: The above is our fixed supplier. It’s subject to be replaced by same quality components of other brand if the above supplier can’t supply the components in case of any special matter.
4. List of accessories and spare parts：
NO. | Name | Specifications | Unit | QTY. | Remark |
1 | Spindle | TQC250-2CL | 1 | ||
2 | Flat cutter head | Ф100 | set | 1 | Install 4.5 * 16 * 16 * 90 ° imported flat blade and install it on the equipment |
3 | R28 arc cutter head | Ф100 | set | 1 | Install the R28 blade and install it on the device |
4 | Fork wrench | 24-27 | 1 | tool
| |
5 | inner hexagon spanner | set | 1 | ||
6 | inner hexagon spanner | 12mm | 1 | ||
7 | Adjustable spanner | 250mm | 1 | ||
8 | Cruciform screw cutter | 1 | |||
9 | Manual oil pot | 1 | |||
10 | Flat blade | 4.5*16*16*90 | set | 1 | Imported flat blade, 16 pieces, free |
11 | R28 arc blade | set | 1 | Eight on the left and eight on the right,free | |
12 | R40 arc blade | set | 1 | Eight on the left and eight on the right,free | |
13 | Blade changing wrench | 2 | |||
14 | Press block | set | 1 | Four on the left and four on the right | |
15 | Press blade bolt | 8 | |||
16 | Synchronous belt | 8M-70-800 | 2 | ||
17 | Hydraulic combined gasket | D18 | 4 | M18 × 1.5 oil pipe, accessories | |
18 | O-ring | Ф16*2.5 | 4 | Gb1235-76 (for M18 × 1.5 oil pipe), accessories | |
19 | Air gun | 1 | Equipped with pc8mm spiral gas pipe 5m, equipped with Ф 8 direct head | ||
20 | Equipment manual | 2 | |||
21 | Equipment safety operation procedures | 2 | It's in the manual | ||
22 | Equipment certificate | 1 | |||
23 | Equipment packing list | 1 |
1. Machine Purpose:
The equipment is used for the backhoe processing of angle steel by using the principle of common milling.
2. Main Technical Specifications：
1) Power supply: 3-phase AC440V, 50 Hz.
2) Power: 9 .2kw
3) Shape parameter: About 2200x1700x1800mm
4) Spindle speed: 390r / min
5) Spindle number: 2
6) Shaft spacing: 320mm
7) Automatic feed speed: 100 ~ 650mm / min ( (automatic adjustment)
8) The shortest workpiece length : 350mm
9) Maximum processing angle steel model: Ll250x24
10) Cooling mode: Air cooling (0 . 6MPa）
3. List of the Key Outsourced Components:
NO. | Name | Model | Quantity | Brand |
1 | Flat cutter head | D100 | 1 | QTMT |
2 | Arc cutter head | D100.5 | 1 | QTMT |
3 | Spindle motor | Y132M-8 | 2 | Kaiyuan |
4 | Gear motor | NMRV050-NMRV110 | 2 | WANJIE |
5 | Hydraulic station | 1 | Jinan | |
6 | Slide block | HGW35CA | 12 | HIWIN |
7 | Programmable controller | XC2-42R-E | 1 | XINJE |
8 | Text display | OP320-A | 1 | XINJE |
9 | Frequency converter | HD09-4T1P5G | 1 | HAMANT |
10 | Main electrical components | CHNT |
Note: The above is our fixed supplier. It’s subject to be replaced by same quality components of other brand if the above supplier can’t supply the components in case of any special matter.
4. List of accessories and spare parts：
NO. | Name | Specifications | Unit | QTY. | Remark |
1 | Spindle | TQC250-2CL | 1 | ||
2 | Flat cutter head | Ф100 | set | 1 | Install 4.5 * 16 * 16 * 90 ° imported flat blade and install it on the equipment |
3 | R28 arc cutter head | Ф100 | set | 1 | Install the R28 blade and install it on the device |
4 | Fork wrench | 24-27 | 1 | tool
| |
5 | inner hexagon spanner | set | 1 | ||
6 | inner hexagon spanner | 12mm | 1 | ||
7 | Adjustable spanner | 250mm | 1 | ||
8 | Cruciform screw cutter | 1 | |||
9 | Manual oil pot | 1 | |||
10 | Flat blade | 4.5*16*16*90 | set | 1 | Imported flat blade, 16 pieces, free |
11 | R28 arc blade | set | 1 | Eight on the left and eight on the right,free | |
12 | R40 arc blade | set | 1 | Eight on the left and eight on the right,free | |
13 | Blade changing wrench | 2 | |||
14 | Press block | set | 1 | Four on the left and four on the right | |
15 | Press blade bolt | 8 | |||
16 | Synchronous belt | 8M-70-800 | 2 | ||
17 | Hydraulic combined gasket | D18 | 4 | M18 × 1.5 oil pipe, accessories | |
18 | O-ring | Ф16*2.5 | 4 | Gb1235-76 (for M18 × 1.5 oil pipe), accessories | |
19 | Air gun | 1 | Equipped with pc8mm spiral gas pipe 5m, equipped with Ф 8 direct head | ||
20 | Equipment manual | 2 | |||
21 | Equipment safety operation procedures | 2 | It's in the manual | ||
22 | Equipment certificate | 1 | |||
23 | Equipment packing list | 1 |
