 |
| Quantity: | |
|---|---|
FPHQ6925
Part I Processed Workpieces and Parameters
| 1 | Overall size of machine | About 32400 x 8150 x 5800 mm |
| 2 | Chamber open size (W*H) | 2500*600 mm |
| 3 | Max. Workpiece size (L*W*H) | 12000*2300*500 mm |
| 4 | Processing speed | 0.5-2.0 m/min (Depends on the workpiece condition) |
| 5 | Finish level | Sa 2.5 |
| 6 | Processing material | Q235/Q345/65Mn/HT/ZG etc. |
| 7 | Surface roughness | 30~85 μ (Depends on abrasive size) |
| 8 | Compressed air consumption | 1m³/min |
| 9 | Compressed air pressure | 0.5-0.7MPa |
| 10 | Electric power supply | 380V, 3P, 50HZ or customized |
| 11 | Pit requirement | Waterproof |
Part II Technical Data of FPHQ6925 Shot Blasting Machine
1 |
Roller conveyor system
| Total conveyor length | 32400 mm |
Roller diameter | 133 mm | ||
Dynamic load | 1000 kg/m | ||
Roller separation distance | 400 mm | ||
Transporting speed | 0.1-5 m/min (frequency control) | ||
Driving motor power | 2*3 kw | ||
2 |
Auto loading and unloading system
| Transport speed | 0.5 - 5 m/min |
Width of conveyor | 2500 mm | ||
Length of conveyor | 12000 mm | ||
Loading capacity | 15 tons | ||
Transportation mode | Hydraulic | ||
Power of hydraulic station | 2 x 7.5 kw | ||
Vehicle quantity | 2 x 7 sets | ||
Vehicle transport power | 2 x 5.5 kw | ||
3 | Shot blasting system | Blasting chamber | Material of inner protective linear: SPMn13 |
Material of the chamber shell: Q235 | |||
Auxiliary chamber | With rubber curtains For sealing the abrasive flying out of the chamber | ||
Blasting turbines with frequency inverter | Type :Q034 | ||
Quantity: 6 units | |||
Impeller structure: Double disc | |||
Blade structure: Straight line | |||
Connection method: Direct connection | |||
Blasting capacity: 250 kg/min each | |||
Power: 15 kw each | |||
Speed: 76 m/s | |||
Qty of frequency controller: 6 pcs | |||
4 |
Shot recovery system | Screw conveyor | Conveying capacity: 90 t/h Screw diameter: ≈320 mm Power: 5.5 kw Qty: 2 sets |
Bucket elevator | Lifting capacity: 90 t/h Lifting speed: 1.21 m/s Power: 7.5 kw Qty: 1 set | ||
Separator | Quantity of separation: 90 t/h Air speed: 4-5 m/s Waste content: ≤1% (Full curtain and flow curtain type multistage winnowing) Power: 5.5 kw Qty: 1 set | ||
5 | Shot control system | Suggest abrasive | Φ0.2~1.5, cast steel alloy shot, stainless steel shot, etc.according to customer’s requirement |
First loading | ≈3000 kgs (user prepare） | ||
Maximum flow of single supplying shot valve | 500 Kg/min | ||
Projectile consumption | 0.0075 kg/h/single blasting turbine | ||
6 | Shot replenishment system | Replenishment hopper | 3000 kgs |
Shot level sensor | 1 Set | ||
Replenishment method | Automatic feeding | ||
7 | Dust removal system | Fan power | 2 x 11 kw |
Dust removal efficiency | ＞99.2％ | ||
Total pressure | ≈2390 pa | ||
Ventilation volume | ≈24000 m3/h | ||
Cartridge quantity | 16 -φ350×660 mm | ||
Filter area | 350㎡ | ||
Filtering material | Polyester coated filter cartridge | ||
Filtering accuracy | 1 μm | ||
Dust falling way | Automatic back pulse | ||
Backblow Control | Pulse Controller | ||
Dust emission level | ≤10 mg/m3 | ||
Muffler | 1 piece | ||
8 |
Abrasive cleaning system | Rolling sweep brush | Rolling brush diameter: 900 mm Motor power: 3 kw |
Abrasive collect conveyor | Conveying capacity: 30 T/H Motor power: 2.2 kw Quantity: 1 set | ||
High pressure blower | Total pressure: ≈ 5180 pa Air volume: ≈ 6762 m3/h Power: 18.5 kw Quantity: 1 set | ||
Lifting device | Lifting mode: Automatic height adjustment Power: 3 kw Quantity: 1 set | ||
Height detective control | 1 Set | ||
9 | Electric control system | PLC, one-button operation system, cables, low-voltage electric, fault automatic detection alarm function, etc, Stepless frequency conversion speed regulation of roller conveyor, frequency controlled of blasting turbine | |
10 | Noise | ||
11 | Total electric power | ||
12 | Production time | About 50 workdays | |
Part I Processed Workpieces and Parameters
| 1 | Overall size of machine | About 32400 x 8150 x 5800 mm |
| 2 | Chamber open size (W*H) | 2500*600 mm |
| 3 | Max. Workpiece size (L*W*H) | 12000*2300*500 mm |
| 4 | Processing speed | 0.5-2.0 m/min (Depends on the workpiece condition) |
| 5 | Finish level | Sa 2.5 |
| 6 | Processing material | Q235/Q345/65Mn/HT/ZG etc. |
| 7 | Surface roughness | 30~85 μ (Depends on abrasive size) |
| 8 | Compressed air consumption | 1m³/min |
| 9 | Compressed air pressure | 0.5-0.7MPa |
| 10 | Electric power supply | 380V, 3P, 50HZ or customized |
| 11 | Pit requirement | Waterproof |
Part II Technical Data of FPHQ6925 Shot Blasting Machine
1 |
Roller conveyor system
| Total conveyor length | 32400 mm |
Roller diameter | 133 mm | ||
Dynamic load | 1000 kg/m | ||
Roller separation distance | 400 mm | ||
Transporting speed | 0.1-5 m/min (frequency control) | ||
Driving motor power | 2*3 kw | ||
2 |
Auto loading and unloading system
| Transport speed | 0.5 - 5 m/min |
Width of conveyor | 2500 mm | ||
Length of conveyor | 12000 mm | ||
Loading capacity | 15 tons | ||
Transportation mode | Hydraulic | ||
Power of hydraulic station | 2 x 7.5 kw | ||
Vehicle quantity | 2 x 7 sets | ||
Vehicle transport power | 2 x 5.5 kw | ||
3 | Shot blasting system | Blasting chamber | Material of inner protective linear: SPMn13 |
Material of the chamber shell: Q235 | |||
Auxiliary chamber | With rubber curtains For sealing the abrasive flying out of the chamber | ||
Blasting turbines with frequency inverter | Type :Q034 | ||
Quantity: 6 units | |||
Impeller structure: Double disc | |||
Blade structure: Straight line | |||
Connection method: Direct connection | |||
Blasting capacity: 250 kg/min each | |||
Power: 15 kw each | |||
Speed: 76 m/s | |||
Qty of frequency controller: 6 pcs | |||
4 |
Shot recovery system | Screw conveyor | Conveying capacity: 90 t/h Screw diameter: ≈320 mm Power: 5.5 kw Qty: 2 sets |
Bucket elevator | Lifting capacity: 90 t/h Lifting speed: 1.21 m/s Power: 7.5 kw Qty: 1 set | ||
Separator | Quantity of separation: 90 t/h Air speed: 4-5 m/s Waste content: ≤1% (Full curtain and flow curtain type multistage winnowing) Power: 5.5 kw Qty: 1 set | ||
5 | Shot control system | Suggest abrasive | Φ0.2~1.5, cast steel alloy shot, stainless steel shot, etc.according to customer’s requirement |
First loading | ≈3000 kgs (user prepare） | ||
Maximum flow of single supplying shot valve | 500 Kg/min | ||
Projectile consumption | 0.0075 kg/h/single blasting turbine | ||
6 | Shot replenishment system | Replenishment hopper | 3000 kgs |
Shot level sensor | 1 Set | ||
Replenishment method | Automatic feeding | ||
7 | Dust removal system | Fan power | 2 x 11 kw |
Dust removal efficiency | ＞99.2％ | ||
Total pressure | ≈2390 pa | ||
Ventilation volume | ≈24000 m3/h | ||
Cartridge quantity | 16 -φ350×660 mm | ||
Filter area | 350㎡ | ||
Filtering material | Polyester coated filter cartridge | ||
Filtering accuracy | 1 μm | ||
Dust falling way | Automatic back pulse | ||
Backblow Control | Pulse Controller | ||
Dust emission level | ≤10 mg/m3 | ||
Muffler | 1 piece | ||
8 |
Abrasive cleaning system | Rolling sweep brush | Rolling brush diameter: 900 mm Motor power: 3 kw |
Abrasive collect conveyor | Conveying capacity: 30 T/H Motor power: 2.2 kw Quantity: 1 set | ||
High pressure blower | Total pressure: ≈ 5180 pa Air volume: ≈ 6762 m3/h Power: 18.5 kw Quantity: 1 set | ||
Lifting device | Lifting mode: Automatic height adjustment Power: 3 kw Quantity: 1 set | ||
Height detective control | 1 Set | ||
9 | Electric control system | PLC, one-button operation system, cables, low-voltage electric, fault automatic detection alarm function, etc, Stepless frequency conversion speed regulation of roller conveyor, frequency controlled of blasting turbine | |
10 | Noise | ||
11 | Total electric power | ||
12 | Production time | About 50 workdays | |