 |
| Quantity: | |
|---|---|
BM55/6
I. The main purpose
This machine is mainly used in construction, bridge, municipal and other steel structure industries H-beam end wing milling groove, milling end face and web milling arc groove.
III.Main specifications and performance parameters:
1. Longitudinal slide:
(1) Quantity: 1
(2) Longitudinal stroke: 300mm
(3) Drive motor power: 0.37kW
2. Transverse slide table :
(1) Quantity: 1
(2) Lateral stroke: 1050mm
(3) Drive motor power: 0.37kW
3. Milling power head:
(1) Quantity: 2
(2) Milling cutter: Indexable hard alloy blade
(3) Axial adjustment of cone milling cutter: 80mm
(4) Spindle motor power: 15KW×2
(5) Processing range: (as shown in the figure).
H=220~1250mm S= MAX 300mm
B=100~ 600mm
T= 10~ 55mm
R =35mm r =10mm C=40(55)mm
4. Milling column:
(1) Quantity: 2
(2) Vertical movement stroke of the power head: 1300mm
(3) Vertical movement drive motor: 2.2KW×2
(4) Clamp moving range: 100~600mm
Pinch method: hydraulic clamping
5. Milling depth retaining iron:
(1) Quantity: 2
(2) Working stroke: 0~40mm
(3) Drive motor: 0.06KW×2
6. Conveyor roller table:
(1) Length of conveyor roller table outside the machine: 5000mm
(2) External conveying motor power: 1.1kW
(3) The power of the conveying motor in the machine: 0.55kW
7. Dimensions of the host (length×width×height): 7.0×4.0×2.8 m
8. Weight: about 11 t
IV. Catalog of major purchased parts
No. | Name | Brand | Country |
1 | Linear rolling guide pair | HIWIN/CSK | Taiwan, China |
2 | Hydraulic pumps | JUSTMARK | Taiwan, China |
3 | Internal shaft oil pump motor | QUNCE | Taiwan, China |
4 | Solenoid hydraulic valves | ATOS/YUKEN | Italy/Japan |
5 | Programmable Controllers | Mitsubishi | Japan |
6 | Frequency converters | INVT/Inovance | China |
7 | Limit switches | TEND | Taiwan, China |
8 | Touch screen | HMI | Taiwan, China |
Note: The above supporting manufacturers are the company's designated suppliers, in case of, special circumstances can not be supplied, will take the same level of products instead, but the quality standards are not lower than the products supplied by the above suppliers.,
Ⅴ.List of spare parts
No. | Code name | Name | Quantity | Remark |
1 | BM55/12.2-19 | Set screws | 3 | |
2 | BM55/12.2-17 | washer | 4 | |
3 | BM55/12.2-13 | Cylindrical milling cutter (full of blades) | 1 piece of left-hand rotation, 1 piece of right-hand rotation | Includes machine-mounted blades with 50% spare blades |
4 | BM55/12.2-15A | Circular milling cutters (full of blades) | 1 piece left-handed, 1 right-hand turn | |
5 | BM55/12.2-20A | Cone milling cutter (full of blades) | 2 left-handed or 2 right-handed pieces | |
6 | Blade fastening screws | 10 in each size | ||
7 | Special knife fastening wrench | 1 in each size | ||
8 | BM55/12.2-54 | Wrench | 1 | |
9 | BM55/12.2-55 | Handle | 1 | |
10 | JB/GQ0341-89 | Pipe joint 12.5 | 2 | |
11 | ZBJ51002-87 | Hose Clamp 25 | 2 | |
12 | HTD-585-5M | Timing belts | 2 | |
13 | HFH2-P1-3-P-1 | Manometer hose | 1 | |
14 | YN-63-I 10 | Pressure gauge 10MPa | 1 |
VI.Working Environment:
1. Working power supply: three-phase four-wire system 380±10%V 50±1HZ
2. Ambient temperature: 0-40°C
3. Ambient humidity: ≤75%.
I. The main purpose
This machine is mainly used in construction, bridge, municipal and other steel structure industries H-beam end wing milling groove, milling end face and web milling arc groove.
III.Main specifications and performance parameters:
1. Longitudinal slide:
(1) Quantity: 1
(2) Longitudinal stroke: 300mm
(3) Drive motor power: 0.37kW
2. Transverse slide table :
(1) Quantity: 1
(2) Lateral stroke: 1050mm
(3) Drive motor power: 0.37kW
3. Milling power head:
(1) Quantity: 2
(2) Milling cutter: Indexable hard alloy blade
(3) Axial adjustment of cone milling cutter: 80mm
(4) Spindle motor power: 15KW×2
(5) Processing range: (as shown in the figure).
H=220~1250mm S= MAX 300mm
B=100~ 600mm
T= 10~ 55mm
R =35mm r =10mm C=40(55)mm
4. Milling column:
(1) Quantity: 2
(2) Vertical movement stroke of the power head: 1300mm
(3) Vertical movement drive motor: 2.2KW×2
(4) Clamp moving range: 100~600mm
Pinch method: hydraulic clamping
5. Milling depth retaining iron:
(1) Quantity: 2
(2) Working stroke: 0~40mm
(3) Drive motor: 0.06KW×2
6. Conveyor roller table:
(1) Length of conveyor roller table outside the machine: 5000mm
(2) External conveying motor power: 1.1kW
(3) The power of the conveying motor in the machine: 0.55kW
7. Dimensions of the host (length×width×height): 7.0×4.0×2.8 m
8. Weight: about 11 t
IV. Catalog of major purchased parts
No. | Name | Brand | Country |
1 | Linear rolling guide pair | HIWIN/CSK | Taiwan, China |
2 | Hydraulic pumps | JUSTMARK | Taiwan, China |
3 | Internal shaft oil pump motor | QUNCE | Taiwan, China |
4 | Solenoid hydraulic valves | ATOS/YUKEN | Italy/Japan |
5 | Programmable Controllers | Mitsubishi | Japan |
6 | Frequency converters | INVT/Inovance | China |
7 | Limit switches | TEND | Taiwan, China |
8 | Touch screen | HMI | Taiwan, China |
Note: The above supporting manufacturers are the company's designated suppliers, in case of, special circumstances can not be supplied, will take the same level of products instead, but the quality standards are not lower than the products supplied by the above suppliers.,
Ⅴ.List of spare parts
No. | Code name | Name | Quantity | Remark |
1 | BM55/12.2-19 | Set screws | 3 | |
2 | BM55/12.2-17 | washer | 4 | |
3 | BM55/12.2-13 | Cylindrical milling cutter (full of blades) | 1 piece of left-hand rotation, 1 piece of right-hand rotation | Includes machine-mounted blades with 50% spare blades |
4 | BM55/12.2-15A | Circular milling cutters (full of blades) | 1 piece left-handed, 1 right-hand turn | |
5 | BM55/12.2-20A | Cone milling cutter (full of blades) | 2 left-handed or 2 right-handed pieces | |
6 | Blade fastening screws | 10 in each size | ||
7 | Special knife fastening wrench | 1 in each size | ||
8 | BM55/12.2-54 | Wrench | 1 | |
9 | BM55/12.2-55 | Handle | 1 | |
10 | JB/GQ0341-89 | Pipe joint 12.5 | 2 | |
11 | ZBJ51002-87 | Hose Clamp 25 | 2 | |
12 | HTD-585-5M | Timing belts | 2 | |
13 | HFH2-P1-3-P-1 | Manometer hose | 1 | |
14 | YN-63-I 10 | Pressure gauge 10MPa | 1 |
VI.Working Environment:
1. Working power supply: three-phase four-wire system 380±10%V 50±1HZ
2. Ambient temperature: 0-40°C
3. Ambient humidity: ≤75%.
