 |
| Quantity: | |
|---|---|
BM60/6
I. Main use
This machine is mainly used for H beam material end wing plate milling groove, milling end face and web milling groove in construction, bridge, municipal and other steel structure industries.
II. Main specifications and performance parameters:
(1) Longitudinal slide:
1 Quantity: 1
2 Longitudinal stroke: 300mm
3 Drive motor power: 0.37kW
(2) Transverse slide table:
1 Quantity: 1
2 Longitudinal stroke: 1300mm
3 Drive motor power: 0.37kW
(3) Milling power head:
1 Quantity: 2
2 Milling cutter: indexable carbide insert
3 Axial adjustment of cone milling cutter: 80mm
4 Spindle motor power: 15KWx2
5 Processing range: (as shown in the figure).
(4) Milling column:
1Quantity: 2
2 Power head vertical movement stroke: 1700mm
3 Vertical movement drive motor: 2.2kWx2
4 Clamp moving range: 100~1000mm
5 Clamping method: Hydraulic clamping
(5) Milling deep stopper:
1 Quantity: 2
2 Working stroke: 0~40mm
3 Drive motor: 0.06kWx2
(6) Conveying roller table:
1 Length of external conveyor roller table: 5000mm
2 Off-board transmission motor power: 1.1kW
3 In-machine transmission motor power: 0.55kW
(7) Main machine dimensions (length× width × height):
About 7.3×4.3×2.2 m
(8) Main Machine weight: About 10000KG
IV. Key Outsourced components list
Sr. No. | Name | Brand | Country |
1 | Linear slides | HIWIN/HTPM | Taiwan, China |
2 | Hydraulic pump | Justmark/Yuken | Taiwan/Japan |
3 | Electro-magnetic hydraulic valve | ATOS/YYuken | Italy/Japan |
4 | PLC | MITSUBISHI | Japan |
5 | Frequency transducer | Invt. | China |
6 | Touch screen | PanelMaster | Taiwan, China |
Note: The above supporting manufacturers are the company's designated suppliers, it’s subject to be replaced by other brand with same quality level.
V. Free accessories and spare parts list to be shipped together with machine
Sr. No. | Name | Quantity | remark |
1 | Cylindrical milling cutter （with inserted blades） | 1 piece of Left-handed and 1 piece of right-handedness | Including the part installed in the machine |
2 | Circular milling cutter （with inserted blades） | 1 piece of Left-handed and 1 piece of right-handedness | |
3 | Cone milling cutter （with inserted blades） | 2 pieces left-handed, or 2 pieces right-handed | |
4 | Blade fastening screws | 10 pcs of each size | |
5 | Spare Paint | 2 kegs | |
6 | Special tool fastening spanner | 1 set of each type |
VI. Working Environment:
1. Working power: three-phase four-wire system 380±10%V 50±1HZ
2. Compressed air pressure: ≥0.5MPa
3. Ambient temperature: 0-40°C
4. Ambient humidity: ≤75%.
I. Main use
This machine is mainly used for H beam material end wing plate milling groove, milling end face and web milling groove in construction, bridge, municipal and other steel structure industries.
II. Main specifications and performance parameters:
(1) Longitudinal slide:
1 Quantity: 1
2 Longitudinal stroke: 300mm
3 Drive motor power: 0.37kW
(2) Transverse slide table:
1 Quantity: 1
2 Longitudinal stroke: 1300mm
3 Drive motor power: 0.37kW
(3) Milling power head:
1 Quantity: 2
2 Milling cutter: indexable carbide insert
3 Axial adjustment of cone milling cutter: 80mm
4 Spindle motor power: 15KWx2
5 Processing range: (as shown in the figure).
(4) Milling column:
1Quantity: 2
2 Power head vertical movement stroke: 1700mm
3 Vertical movement drive motor: 2.2kWx2
4 Clamp moving range: 100~1000mm
5 Clamping method: Hydraulic clamping
(5) Milling deep stopper:
1 Quantity: 2
2 Working stroke: 0~40mm
3 Drive motor: 0.06kWx2
(6) Conveying roller table:
1 Length of external conveyor roller table: 5000mm
2 Off-board transmission motor power: 1.1kW
3 In-machine transmission motor power: 0.55kW
(7) Main machine dimensions (length× width × height):
About 7.3×4.3×2.2 m
(8) Main Machine weight: About 10000KG
IV. Key Outsourced components list
Sr. No. | Name | Brand | Country |
1 | Linear slides | HIWIN/HTPM | Taiwan, China |
2 | Hydraulic pump | Justmark/Yuken | Taiwan/Japan |
3 | Electro-magnetic hydraulic valve | ATOS/YYuken | Italy/Japan |
4 | PLC | MITSUBISHI | Japan |
5 | Frequency transducer | Invt. | China |
6 | Touch screen | PanelMaster | Taiwan, China |
Note: The above supporting manufacturers are the company's designated suppliers, it’s subject to be replaced by other brand with same quality level.
V. Free accessories and spare parts list to be shipped together with machine
Sr. No. | Name | Quantity | remark |
1 | Cylindrical milling cutter （with inserted blades） | 1 piece of Left-handed and 1 piece of right-handedness | Including the part installed in the machine |
2 | Circular milling cutter （with inserted blades） | 1 piece of Left-handed and 1 piece of right-handedness | |
3 | Cone milling cutter （with inserted blades） | 2 pieces left-handed, or 2 pieces right-handed | |
4 | Blade fastening screws | 10 pcs of each size | |
5 | Spare Paint | 2 kegs | |
6 | Special tool fastening spanner | 1 set of each type |
VI. Working Environment:
1. Working power: three-phase four-wire system 380±10%V 50±1HZ
2. Compressed air pressure: ≥0.5MPa
3. Ambient temperature: 0-40°C
4. Ambient humidity: ≤75%.
