 |
| Quantity: | |
|---|---|
CNC High Speed Drilling and Marking Machine for Angles
Machine Model: ADM2532
CNC angle steel high speed drilling production line is mainly used for drilling and stamping of large size and high strength angle steel in transmission line tower. All the holes on the angle steel can be drilled with high quality and position accuracy, high production efficiency and automation.
There are three groups of drilling heads on each side of drilling unit, which can install three kinds of drills with different diameters. Three groups of drilling heads can move altogether controlled by CNC to change the drilling stadia.
Technical specification of ADM2532
Angle size(mm) | 140×140×10 ~ 250×250×32 |
Range of back mark value(mm) | 50 ~ 220(stepless) |
The quantity of drilling hole rows per side | arbitrariness |
Quantity of drilling spindle per side(pcs) | 3 |
Range of drilling diameter(hard metal)(mm) | φ17.5 ~ φ30mm |
Quantity of CNC axis (Nos.) | 9 |
Maximum speed of drilling spindle （rpm） | 6000r/min |
Max. length of workpiece (m) | 12 |
Angle feeding speed (m/min) | 40 |
Quantity of character group | 1 group |
Number of character in each group (pcs) | 18 |
Spindle taper | BT40 |
Marking Force(KN) | 1030 |
The max length of finished angle(m) | 12m |
A. There are four sets of transverse conveyor, infeeding automatically and intermittently
B. Type of programming: keyboard input, USB interface input.
C. Working environment:
Working temperature: 0℃~ 40℃
Power: Three phase four wire system
AC Voltage: 415V
Fluctuation of voltage: ±10%
Frequency: 50 Hz
1) List of accessories and spare parts of ADM2532
NO. | Code | Name | Qty. | Remark |
1 | BL20.2-77 | Drag spring | 2 | |
2 | 4×90×50 | Synchronous toothed belt | 1 | |
3 | BL20.2-73 | Upper paw | 2 | Including the equipment installed on the machine |
4 | BL20.2-73A | Upper paw | 2 | |
5 | BL20.2-73B | Upper paw | 2 | |
6 | BL20.2-74 | Lower claw | 2 | Including the equipment installed on the machine |
7 | BL2020.4-12（1） | Marking character | 10 | Numbers 0-9 |
8 | Air gun (with spiral tube) | 1 | ||
9 | Vegetable oil based micro cutting oil | 2 kegs | 1L/keg | |
10 | HFH2-P1-3-P-1 | Pressure measuring hose | 1 | |
11 | YN-60 | Pressure gauge (10MPa) | 1 | |
12 | FAX-250×20 | filter element | 1 | |
13 | Common tools (including: full set of hexagon wrench, 500, 300, 150 mm adjustable wrench, full set of solid wrench, four piece screwdriver) | 1 batch | ||
14 | Nitrogen charging tool | 1 | ||
15 | Pressure oil pot | 1 | ||
16 | PC program CD | 1 | ||
17 | Atlas of wearing parts | 2 | ||
18 | Certificate and packing list | 1 volume for each | ||
19 | Instruction manual (mechanical, hydraulic, electrical) | 2 volumes for each |
2) List of the Key Outsourced Components of ADM2532
No. | Name | Brand | Country |
1 | AC Servo motor | Panasonic/Siemens | Japan/Germany |
2 | Linear Guides | Hiwin/CSK | Taiwan China |
3 | Flexible coupling | KTR | Germany |
4 | Rotary joint | Deublin | USA |
5 | Hydraulic valve | ATOS/Yuken | Italy/ Taiwan China |
6 | Pneumatic combined unit | SMC/Airtac | Japan/Taiwan China |
7 | Air valve | AIRTAC | Taiwan China |
8 | Cylinder | AIRTAC | Taiwan China |
9 | CPU | Mitsubishi | Japan |
10 | Positioning module | Mitsubishi | Japan |
11 | Double vane pump | Albert | USA |
CNC High Speed Drilling and Marking Machine for Angles
Machine Model: ADM2532
CNC angle steel high speed drilling production line is mainly used for drilling and stamping of large size and high strength angle steel in transmission line tower. All the holes on the angle steel can be drilled with high quality and position accuracy, high production efficiency and automation.
There are three groups of drilling heads on each side of drilling unit, which can install three kinds of drills with different diameters. Three groups of drilling heads can move altogether controlled by CNC to change the drilling stadia.
Technical specification of ADM2532
Angle size(mm) | 140×140×10 ~ 250×250×32 |
Range of back mark value(mm) | 50 ~ 220(stepless) |
The quantity of drilling hole rows per side | arbitrariness |
Quantity of drilling spindle per side(pcs) | 3 |
Range of drilling diameter(hard metal)(mm) | φ17.5 ~ φ30mm |
Quantity of CNC axis (Nos.) | 9 |
Maximum speed of drilling spindle （rpm） | 6000r/min |
Max. length of workpiece (m) | 12 |
Angle feeding speed (m/min) | 40 |
Quantity of character group | 1 group |
Number of character in each group (pcs) | 18 |
Spindle taper | BT40 |
Marking Force(KN) | 1030 |
The max length of finished angle(m) | 12m |
A. There are four sets of transverse conveyor, infeeding automatically and intermittently
B. Type of programming: keyboard input, USB interface input.
C. Working environment:
Working temperature: 0℃~ 40℃
Power: Three phase four wire system
AC Voltage: 415V
Fluctuation of voltage: ±10%
Frequency: 50 Hz
1) List of accessories and spare parts of ADM2532
NO. | Code | Name | Qty. | Remark |
1 | BL20.2-77 | Drag spring | 2 | |
2 | 4×90×50 | Synchronous toothed belt | 1 | |
3 | BL20.2-73 | Upper paw | 2 | Including the equipment installed on the machine |
4 | BL20.2-73A | Upper paw | 2 | |
5 | BL20.2-73B | Upper paw | 2 | |
6 | BL20.2-74 | Lower claw | 2 | Including the equipment installed on the machine |
7 | BL2020.4-12（1） | Marking character | 10 | Numbers 0-9 |
8 | Air gun (with spiral tube) | 1 | ||
9 | Vegetable oil based micro cutting oil | 2 kegs | 1L/keg | |
10 | HFH2-P1-3-P-1 | Pressure measuring hose | 1 | |
11 | YN-60 | Pressure gauge (10MPa) | 1 | |
12 | FAX-250×20 | filter element | 1 | |
13 | Common tools (including: full set of hexagon wrench, 500, 300, 150 mm adjustable wrench, full set of solid wrench, four piece screwdriver) | 1 batch | ||
14 | Nitrogen charging tool | 1 | ||
15 | Pressure oil pot | 1 | ||
16 | PC program CD | 1 | ||
17 | Atlas of wearing parts | 2 | ||
18 | Certificate and packing list | 1 volume for each | ||
19 | Instruction manual (mechanical, hydraulic, electrical) | 2 volumes for each |
2) List of the Key Outsourced Components of ADM2532
No. | Name | Brand | Country |
1 | AC Servo motor | Panasonic/Siemens | Japan/Germany |
2 | Linear Guides | Hiwin/CSK | Taiwan China |
3 | Flexible coupling | KTR | Germany |
4 | Rotary joint | Deublin | USA |
5 | Hydraulic valve | ATOS/Yuken | Italy/ Taiwan China |
6 | Pneumatic combined unit | SMC/Airtac | Japan/Taiwan China |
7 | Air valve | AIRTAC | Taiwan China |
8 | Cylinder | AIRTAC | Taiwan China |
9 | CPU | Mitsubishi | Japan |
10 | Positioning module | Mitsubishi | Japan |
11 | Double vane pump | Albert | USA |
