 |
| Quantity: | |
|---|---|
PP1009S
1. Machine Purpose:
The CNC punching machine for automobile trabeculae is mainly used for punching small and medium sized plates in the automobile industry. The plate can be punched after one-time clamping to ensure the position accuracy of the hole. It has high work efficiency and degree of automation, and is especially suitable for multi variety processing. This machine can process 800mm × 3500mm plates in one clamping, and the maximum size of plates can reach 800mm × 700mm by positioning and transferring with auxiliary clamp.
2. Main Technical Specifications：
Punching capacity | kN | 1000 | ||
Maximum plate size | mm | 800×3500 (one time’s positioning) 800×7000(secondary positioning), but the worktable for secondary positioning of 800*7000 shall be provided by the client himself | ||
Plate thickness range | mm | 4～12 | ||
Pierce Station | Module number | 9(top 5, bottom 4) | ||
Maximum punch diameter | mm | φ50 | ||
Punch size (mm) | φ9、φ11、φ13、φ15、φ17、φ21、φ25、φ30、φ35 (including a set of die with plate thickness of 8) | |||
Plate material deformation (height tolerance) | mm | <25 (Hook bend≤2mm, when hook bend＞2mm，the minimum distance from hole centerline to boundary edge becomes bigger) | ||
Minimum hole margin | mm | ≤φ18 20 | ||
mm | ＞18 70 | |||
Number of punching holes | Hole Nos. per minute | 〉42 | ||
Number of clamps | 3 | |||
System pressure | high pressure | MPa | 24 | |
low pressure | MPa | 6 | ||
air pressure | MPa | 0.5 | ||
Motor power of hydraulic pump | kW | 22 | ||
X-axis servo motor power | kW | 5 | ||
Y-axis servo motor power | kW | 5 | ||
Total capacity | kW | 55 | ||
Accuracy of hole position on plate after punching：
Work Condition | Accuracy of X, Y axis |
When the hole spacing is less than or equal to 400mm | ±0.15mm |
When the hole spacing is greater than 400mm and less than 2000mm | ±0.30mm |
When the hole spacing is more than 2000mm and less than 3500mm | ±0.50mm |
When the hole spacing is more than 3500mm and less than 7000mm | ±1mm (Secondary positioning) |
3. List of the Key Outsourced Components:
NO | Name | Brand | Country |
1 | Numerical control system | Siemens 808D | Germany |
2 | Servo motor and servo driver | Siemens / Panasonic | Germany |
3 | Linear motion guide | HIWIN/PMI | Taiwan, China |
4 | Ball screw | I+F/NEEF | Germany |
5 | Cylinder | SMC/FESTO | Japan / Germany |
6 | Solid state relay | Weidmuller | Germany |
7 | Drag chain | Igus/CPS | Germany / Korea |
8 | Double vane pump | Denison/ Albert | U.S.A |
9 | Hydraulic valve | ATOS | Italy |
10 | Oil cooler | Tofly/LeiBo | China |
11 | Oil lubrication device | HERG | Japan |
12 | Low voltage electrical components | Schneider | France |
Note: The above is our standard supplier. It’s subject to be replaced by same quality components of other brand if the above supplier can’t supply the components in case of any special matter
4. Work Environment:
1).Power supply： 3 phase 4 lines 380±10%V 50±1HZ
2).Compressed air pressure： ≥0.5MPa
3).Temperature： 0
4).Humidity： ≤75%
1. Machine Purpose:
The CNC punching machine for automobile trabeculae is mainly used for punching small and medium sized plates in the automobile industry. The plate can be punched after one-time clamping to ensure the position accuracy of the hole. It has high work efficiency and degree of automation, and is especially suitable for multi variety processing. This machine can process 800mm × 3500mm plates in one clamping, and the maximum size of plates can reach 800mm × 700mm by positioning and transferring with auxiliary clamp.
2. Main Technical Specifications：
Punching capacity | kN | 1000 | ||
Maximum plate size | mm | 800×3500 (one time’s positioning) 800×7000(secondary positioning), but the worktable for secondary positioning of 800*7000 shall be provided by the client himself | ||
Plate thickness range | mm | 4～12 | ||
Pierce Station | Module number | 9(top 5, bottom 4) | ||
Maximum punch diameter | mm | φ50 | ||
Punch size (mm) | φ9、φ11、φ13、φ15、φ17、φ21、φ25、φ30、φ35 (including a set of die with plate thickness of 8) | |||
Plate material deformation (height tolerance) | mm | <25 (Hook bend≤2mm, when hook bend＞2mm，the minimum distance from hole centerline to boundary edge becomes bigger) | ||
Minimum hole margin | mm | ≤φ18 20 | ||
mm | ＞18 70 | |||
Number of punching holes | Hole Nos. per minute | 〉42 | ||
Number of clamps | 3 | |||
System pressure | high pressure | MPa | 24 | |
low pressure | MPa | 6 | ||
air pressure | MPa | 0.5 | ||
Motor power of hydraulic pump | kW | 22 | ||
X-axis servo motor power | kW | 5 | ||
Y-axis servo motor power | kW | 5 | ||
Total capacity | kW | 55 | ||
Accuracy of hole position on plate after punching：
Work Condition | Accuracy of X, Y axis |
When the hole spacing is less than or equal to 400mm | ±0.15mm |
When the hole spacing is greater than 400mm and less than 2000mm | ±0.30mm |
When the hole spacing is more than 2000mm and less than 3500mm | ±0.50mm |
When the hole spacing is more than 3500mm and less than 7000mm | ±1mm (Secondary positioning) |
3. List of the Key Outsourced Components:
NO | Name | Brand | Country |
1 | Numerical control system | Siemens 808D | Germany |
2 | Servo motor and servo driver | Siemens / Panasonic | Germany |
3 | Linear motion guide | HIWIN/PMI | Taiwan, China |
4 | Ball screw | I+F/NEEF | Germany |
5 | Cylinder | SMC/FESTO | Japan / Germany |
6 | Solid state relay | Weidmuller | Germany |
7 | Drag chain | Igus/CPS | Germany / Korea |
8 | Double vane pump | Denison/ Albert | U.S.A |
9 | Hydraulic valve | ATOS | Italy |
10 | Oil cooler | Tofly/LeiBo | China |
11 | Oil lubrication device | HERG | Japan |
12 | Low voltage electrical components | Schneider | France |
Note: The above is our standard supplier. It’s subject to be replaced by same quality components of other brand if the above supplier can’t supply the components in case of any special matter
4. Work Environment:
1).Power supply： 3 phase 4 lines 380±10%V 50±1HZ
2).Compressed air pressure： ≥0.5MPa
3).Temperature： 0
4).Humidity： ≤75%
