 |
| Quantity: | |
|---|---|
PHM6060/2
This machine is a gantry mobile CNC drilling machine, which is mainly used for drilling diameter φ Drilling, milling, grooving, chamfering and light milling of tubesheet and flange parts below 60.
1. Main Technical specification
Maximum machining tube sheet size | Length x Width | 6000×6000 mm |
Maximum workable plate thickness | 250 mm | |
Work table | Work table Size | 6500×6000 mm |
T-slot width | 28 mm | |
Loading weigth | 3000KG/㎡ | |
Drilling Spindle | Maximum drilling hole diameter | Φ90 mm |
Maximum Tapping diameter | M42 | |
Maximum Drilling depth | 250mm | |
Maximum length/diameter ratio | ≤7（Crown drill） | |
Spindle speed | 30-3000 r/min | |
Spindle taper | BT50 | |
Spindle motor power | 2×37kW | |
Maximum spindle torquen≤750r/min | 470Nm | |
Distance from lower end face of main shaft to worktable | 280—780 mm | |
Gantry longitudinal movement (x-axis) | Maximum stroke | 6000 mm |
X-axis moving speed | 0—10m/min | |
X-axis servo motor power | 2×4.2kW | |
Lateral movement of spindle (Y-axis) | Maximum distance between two spindles | 6000mm |
Y-axis moving speed | 0—10m/min | |
Y-axis servo motor power | 2×3.6kW | |
Feed motion of spindle (Z axis) | Z-axis travel | 500 mm |
Z-axis feed speed | 0—10m/min | |
Z-axis servo motor power | 2×5.0kW | |
Positioning accuracy | X-axis | 0.06mm/ whole travel |
Y-axis | 0.05mm/ whole travel | |
Repeat positioning accuracy | X-axis | 0.04mm/ whole travel |
Y-axis | 0.03mm/ whole travel | |
Hydraulic system | Hydraulic pump pressure / flow | 15MPa /22L/min |
Hydraulic pump motor power | 5.5 kW | |
Pneumatic system | Air supply pressure | 0.5 MPa |
Chip removal and cooling | Chip conveyor type | Flat chain |
Number of chip conveyor | 2 | |
Chip removal speed | 1m/min | |
Chip conveyor motor power | 2×0.75kW | |
Cooling mode | Internal cooling + external cooling | |
Maximum pressure | 2MPa | |
Maximum flow | 2×50L/min | |
Electrical system | CNC Control System | KND K2000 |
CNC Number | 6 | |
Total motor power | About 120 kW | |
Overall dimensions of machine | Length× Width × Height | About 10.8m×9.7m×4.1m |
2. Main outsourcing components list
NO. | Name | Brand | Country |
1 | Linear guide way | HIWIN or HTPM | Taiwan, China |
2 | CNC Control System | KND | China |
3 | Feeding Servo motor and driver | KND | China |
4 | Spindle servo motor and driver | KND | China |
5 | Precision spindle | KENTURN OR SPINTECH | Taiwan, China |
6 | Ball screw | TBI/HIWIN/NEEF | Taiwan/Germany |
7 | Hydraulic valve | YUKEN OR Justmark | Japan/Taiwan |
8 | Oil pump | Justmark | Taiwan, China |
9 | Automatic lubrication system | HERG | Japan |
10 | Buttons, indicator lights and other main electrical components | SCHBEIDER/ABB | France /Germany |
Note: The above is our fixed supplier. It’s subject to be replaced by same quality components of other brand if the above supplier can’t supply the components in case of any special matter.
3. List of accessories and spare parts
NO. | Name | Code | QTY |
1 | Photoelectric edge finder | 2 pcs | |
2 | inner hexagon spanner | 1 Set | |
3 | Drilling tool handle and pull nail | Φ40-BT50 | 2 pcs |
4 | Drilling tool handle and pull nail | Φ20-BT50 | 2 pcs |
5 | Spindle Synchronous belt | 1 piece | |
6 | Paint (for spare use) | -- | 2 Kegs |
4. Work Environment:
1).Power supply： 3 phase 4 lines 380±10%V 50±1HZ (or as per order)
2).Compressed air pressure： ≥0.5MPa
3).Temperature： 0-40°C
4).Humidity： ≤75%
This machine is a gantry mobile CNC drilling machine, which is mainly used for drilling diameter φ Drilling, milling, grooving, chamfering and light milling of tubesheet and flange parts below 60.
1. Main Technical specification
Maximum machining tube sheet size | Length x Width | 6000×6000 mm |
Maximum workable plate thickness | 250 mm | |
Work table | Work table Size | 6500×6000 mm |
T-slot width | 28 mm | |
Loading weigth | 3000KG/㎡ | |
Drilling Spindle | Maximum drilling hole diameter | Φ90 mm |
Maximum Tapping diameter | M42 | |
Maximum Drilling depth | 250mm | |
Maximum length/diameter ratio | ≤7（Crown drill） | |
Spindle speed | 30-3000 r/min | |
Spindle taper | BT50 | |
Spindle motor power | 2×37kW | |
Maximum spindle torquen≤750r/min | 470Nm | |
Distance from lower end face of main shaft to worktable | 280—780 mm | |
Gantry longitudinal movement (x-axis) | Maximum stroke | 6000 mm |
X-axis moving speed | 0—10m/min | |
X-axis servo motor power | 2×4.2kW | |
Lateral movement of spindle (Y-axis) | Maximum distance between two spindles | 6000mm |
Y-axis moving speed | 0—10m/min | |
Y-axis servo motor power | 2×3.6kW | |
Feed motion of spindle (Z axis) | Z-axis travel | 500 mm |
Z-axis feed speed | 0—10m/min | |
Z-axis servo motor power | 2×5.0kW | |
Positioning accuracy | X-axis | 0.06mm/ whole travel |
Y-axis | 0.05mm/ whole travel | |
Repeat positioning accuracy | X-axis | 0.04mm/ whole travel |
Y-axis | 0.03mm/ whole travel | |
Hydraulic system | Hydraulic pump pressure / flow | 15MPa /22L/min |
Hydraulic pump motor power | 5.5 kW | |
Pneumatic system | Air supply pressure | 0.5 MPa |
Chip removal and cooling | Chip conveyor type | Flat chain |
Number of chip conveyor | 2 | |
Chip removal speed | 1m/min | |
Chip conveyor motor power | 2×0.75kW | |
Cooling mode | Internal cooling + external cooling | |
Maximum pressure | 2MPa | |
Maximum flow | 2×50L/min | |
Electrical system | CNC Control System | KND K2000 |
CNC Number | 6 | |
Total motor power | About 120 kW | |
Overall dimensions of machine | Length× Width × Height | About 10.8m×9.7m×4.1m |
2. Main outsourcing components list
NO. | Name | Brand | Country |
1 | Linear guide way | HIWIN or HTPM | Taiwan, China |
2 | CNC Control System | KND | China |
3 | Feeding Servo motor and driver | KND | China |
4 | Spindle servo motor and driver | KND | China |
5 | Precision spindle | KENTURN OR SPINTECH | Taiwan, China |
6 | Ball screw | TBI/HIWIN/NEEF | Taiwan/Germany |
7 | Hydraulic valve | YUKEN OR Justmark | Japan/Taiwan |
8 | Oil pump | Justmark | Taiwan, China |
9 | Automatic lubrication system | HERG | Japan |
10 | Buttons, indicator lights and other main electrical components | SCHBEIDER/ABB | France /Germany |
Note: The above is our fixed supplier. It’s subject to be replaced by same quality components of other brand if the above supplier can’t supply the components in case of any special matter.
3. List of accessories and spare parts
NO. | Name | Code | QTY |
1 | Photoelectric edge finder | 2 pcs | |
2 | inner hexagon spanner | 1 Set | |
3 | Drilling tool handle and pull nail | Φ40-BT50 | 2 pcs |
4 | Drilling tool handle and pull nail | Φ20-BT50 | 2 pcs |
5 | Spindle Synchronous belt | 1 piece | |
6 | Paint (for spare use) | -- | 2 Kegs |
4. Work Environment:
1).Power supply： 3 phase 4 lines 380±10%V 50±1HZ (or as per order)
2).Compressed air pressure： ≥0.5MPa
3).Temperature： 0-40°C
4).Humidity： ≤75%
