 |
| Quantity: | |
|---|---|
PLM6060/2
This machine is a gantry mobile CNC drilling machine, which is mainly used for drilling diameter φ Drilling, milling, grooving, chamfering and light milling of tubesheet and flange parts below 60.
1) Technical specification of PLM6060/2
Item | Name | Value |
Maximum Plate Size | L x W | 6000×6000 mm |
Maximum Thickness | 250 mm | |
Work Table | T Slot Width | 28 mm(standard) |
Loading Weight | 3000KG/㎡ | |
Drilling Spindle | Maximum Drilling Diameter | Φ60 mm |
Drilling spindle’s Rod Length vs. Hole diameter | ≤10 | |
RPM | 30～3000 r/min | |
Spindle Tape | BT50 | |
Spindle motor power | 2*22kW | |
Maximum Torque n≤750r/min | 280Nm | |
Distance from Spindle bottom surface to the worktable | 280～780 mm （adjustable as per material thickness） | |
Gantry Longitudinal Movement (X Axis) | Max. Travel | 6000 mm |
Movement speed along X axis | 0～8m/min | |
Servo motor power of X axis | 2×2.7kW | |
Spindle Transversal Movement （Y Axis） | Max. Travel | 6000mm |
Movement speed along Y axis | 0～8m/min | |
Servo motor power of X axis | 2*2.14kW | |
Spindle Feeding Movement （Z Axis） | Max. Travel | 500 mm |
Feeding speed of Z axis | 0～4m/min | |
Servo motor power of Z axis | 2*3.3kW | |
Positioning accuracy | X axis、Y axis | 0.12mm/full travel |
Repeatable positioning accuracy | X axis、Y axis | 0.06mm/full travel |
Hydraulic system | Hydraulic pump pressure/Flow rate | 15MPa /25L/min |
Hydraulic pump motor power | 3.0 kW | |
Pneumatic system | Compressed air pressure | 0.5 MPa |
Scrap removal and Cooling system | Scrap removal tpe | Plate chain |
Scrap removal Nos. | 2 | |
Scrap removal speed | 1m/min | |
Motor Power | 2×0.75kW | |
Cooling way | Inner cooling + Outside cooling | |
Max. Pressure | 2MPa | |
Max. Flow rate | 2*50L/min | |
Electronic system | CNC control system | Siemens 828D |
CNC Axis Nos. | 6 | |
Total power | About 75kW | |
Overall Dimension | L×W×H | About 11m×11m×3m |
Machine weight | About 55000 KG |
Work Environment:
Power supply： 3 phase 5lines 380±10%V 50±1HZ （as per Indian local voltage）
Compressed air pressure： ≥0.5MPa
Temperature： 0-40°C
Humidity： ≤75%
2) List of accessories and spare parts of PLM6060/2
No. | Name | Size | Qty. |
1 | Optical edge finder | 1 piece | |
2 | Inner hexagon wrench | 1 set | |
3 | Tool holder and pull stud | Φ40-BT50 | 2 pcs |
4 | Tool holder and pull stud | Φ20-BT50 | 1 piece |
5 | Spare paints | -- | 2 kegs |
3) List of the Key Outsourced Components of PLM6060/2
No. | Name | Brand | Country |
1 | Roller linear guide rail | Hiwin/HTPM | China Taiwan |
2 | CNC control system | Siemens | Germany |
3 | Servo motor and Servo driver | Siemens | Germany |
4 | Precise spindle | Kenturn/Spintech | China Taiwan |
5 | Hydraulic valve | Yuken/Justmark | Japan |
6 | Oil pump | Justmark | China Taiwan |
7 | Automatic lubricating system | BIJUR / Herg | USA/Japan |
8 | Button, Indicator, low voltage electronic components | ABB/Schneider | Germany/France |
This machine is a gantry mobile CNC drilling machine, which is mainly used for drilling diameter φ Drilling, milling, grooving, chamfering and light milling of tubesheet and flange parts below 60.
1) Technical specification of PLM6060/2
Item | Name | Value |
Maximum Plate Size | L x W | 6000×6000 mm |
Maximum Thickness | 250 mm | |
Work Table | T Slot Width | 28 mm(standard) |
Loading Weight | 3000KG/㎡ | |
Drilling Spindle | Maximum Drilling Diameter | Φ60 mm |
Drilling spindle’s Rod Length vs. Hole diameter | ≤10 | |
RPM | 30～3000 r/min | |
Spindle Tape | BT50 | |
Spindle motor power | 2*22kW | |
Maximum Torque n≤750r/min | 280Nm | |
Distance from Spindle bottom surface to the worktable | 280～780 mm （adjustable as per material thickness） | |
Gantry Longitudinal Movement (X Axis) | Max. Travel | 6000 mm |
Movement speed along X axis | 0～8m/min | |
Servo motor power of X axis | 2×2.7kW | |
Spindle Transversal Movement （Y Axis） | Max. Travel | 6000mm |
Movement speed along Y axis | 0～8m/min | |
Servo motor power of X axis | 2*2.14kW | |
Spindle Feeding Movement （Z Axis） | Max. Travel | 500 mm |
Feeding speed of Z axis | 0～4m/min | |
Servo motor power of Z axis | 2*3.3kW | |
Positioning accuracy | X axis、Y axis | 0.12mm/full travel |
Repeatable positioning accuracy | X axis、Y axis | 0.06mm/full travel |
Hydraulic system | Hydraulic pump pressure/Flow rate | 15MPa /25L/min |
Hydraulic pump motor power | 3.0 kW | |
Pneumatic system | Compressed air pressure | 0.5 MPa |
Scrap removal and Cooling system | Scrap removal tpe | Plate chain |
Scrap removal Nos. | 2 | |
Scrap removal speed | 1m/min | |
Motor Power | 2×0.75kW | |
Cooling way | Inner cooling + Outside cooling | |
Max. Pressure | 2MPa | |
Max. Flow rate | 2*50L/min | |
Electronic system | CNC control system | Siemens 828D |
CNC Axis Nos. | 6 | |
Total power | About 75kW | |
Overall Dimension | L×W×H | About 11m×11m×3m |
Machine weight | About 55000 KG |
Work Environment:
Power supply： 3 phase 5lines 380±10%V 50±1HZ （as per Indian local voltage）
Compressed air pressure： ≥0.5MPa
Temperature： 0-40°C
Humidity： ≤75%
2) List of accessories and spare parts of PLM6060/2
No. | Name | Size | Qty. |
1 | Optical edge finder | 1 piece | |
2 | Inner hexagon wrench | 1 set | |
3 | Tool holder and pull stud | Φ40-BT50 | 2 pcs |
4 | Tool holder and pull stud | Φ20-BT50 | 1 piece |
5 | Spare paints | -- | 2 kegs |
3) List of the Key Outsourced Components of PLM6060/2
No. | Name | Brand | Country |
1 | Roller linear guide rail | Hiwin/HTPM | China Taiwan |
2 | CNC control system | Siemens | Germany |
3 | Servo motor and Servo driver | Siemens | Germany |
4 | Precise spindle | Kenturn/Spintech | China Taiwan |
5 | Hydraulic valve | Yuken/Justmark | Japan |
6 | Oil pump | Justmark | China Taiwan |
7 | Automatic lubricating system | BIJUR / Herg | USA/Japan |
8 | Button, Indicator, low voltage electronic components | ABB/Schneider | Germany/France |
