 |
| Quantity: | |
|---|---|
PHM3030B/2
1.Machine Purpose:
Mainly Drilling tube sheet plates and flanges, the drilling hole diameter is less thanφ80mm. The main function includes drilling holes, reaming, boring, tapping, chamfering, and milling. It’s applicable to take both carbide drill bit and H.S.S. drill bit. The CNC control system’s operation is convenient and easy. The machine has very high work accuracy.
2.Machine’s Supply Range:
No. | Name | Qty. |
1 | Machine Frame | 1 set |
2 | Gantry | 1 set |
3 | Column | 1 set |
4 | Cross beam and Ram | 1 set |
5 | Worktable | 1 set |
6 | Drilling Spindle and headstock | 1 set |
7 | Hydraulic System | 1 set |
8 | Electrical Control System | 1 set |
9 | Centralized Lubrication System | 1 set |
10 | Scrap Removal System | 1 set |
11 | Cooling System | 1 set |
12 | Pneumatic system | 1 set |
3.Main Technical Specifications：
Item | Name | Value |
Maximum Plate Size | L x W | 3000×3000 mm |
Maximum Thickness | 250 mm | |
Work Table | T Slot Width | 28 mm(standard) |
T Slot Direction | Y Axis | |
Loading Weight | 3ton/㎡ | |
Drilling Spindle | Maximum Drilling Diameter | φ80 mm |
Drilling spindle’s Rod Length vs. Hole diameter | ≤10 | |
Maximum Tapping screw | M30 | |
RPM | 30～3000 r/min | |
Spindle Tape | BT50 | |
Spindle motor power | 37kW | |
Maximum Torque n≤750r/min | 470Nm | |
Distance from Spindle bottom surface to the worktable | 280～780 mm （adjustable as per material thickness） | |
Gantry Longitudinal Movement (X Axis) | Max. Travel | 3000 mm |
Movement speed along X axis | 0～16m/min | |
Servo motor power of X axis | 2×3.3kW | |
Spindle Transversal Movement （Y Axis） | Max. Travel | 3000mm |
Movement speed along Y axis | 0～16m/min | |
Servo motor power of X axis | 2.7kW | |
Spindle Feeding Movement （Z Axis） | Max. Travel | 500 mm |
Feeding speed of Z axis | 0～10m/min | |
Servo motor power of Z axis | 4.3kW | |
Positioning accuracy | X axis、Y axis | 0.052mm/full travel |
Repeatable positioning accuracy | X axis、Y axis | 0.033mm/full travel |
Hydraulic system | Hydraulic pump pressure/Flow rate | 15MPa /22L/min |
Hydraulic pump motor power | 5.5 kW | |
Pneumatic system | Compressed air pressure | 0.5 MPa |
Scrap removal and Cooling system | Scrap removal tpe | Plate chain |
Scrap removal Nos. | 2个 | |
Scrap removal speed | 1m/min | |
Motor Power | 2×0.75kW | |
Cooling way | Inner cooling + Outside cooling | |
Max. Pressure | 2MPa | |
Max. Flow rate | 50L/min | |
Electronic system | CNC control system | Siemens 828D |
CNC Axis Nos. | 4 | |
Total power | About 65kW | |
Overall Dimension | L×W×H | About 7.8×6.7×4.1m |
Machine weight | About 30t |
4.Free Accessories list：
No. | Name | Size | Qty. |
1 | Optical edge finder | 1 piece | |
2 | Inner hexagon wrench | 1 set | |
3 | Tool holder and pull stud | Φ40-BT50 | 2 pcs |
4 | Tool holder and pull stud | Φ20-BT50 | 1 piece |
5 | Spare paints | -- | 2 kegs |
5. Work Environment:
1).Power supply： 3 phase 5 lines 380±10%V 50±1HZ
2).Compressed air pressure： ≥0.5MPa
3).Temperature： 0-40°C
4).Humidity： ≤75%
1.Machine Purpose:
Mainly Drilling tube sheet plates and flanges, the drilling hole diameter is less thanφ80mm. The main function includes drilling holes, reaming, boring, tapping, chamfering, and milling. It’s applicable to take both carbide drill bit and H.S.S. drill bit. The CNC control system’s operation is convenient and easy. The machine has very high work accuracy.
2.Machine’s Supply Range:
No. | Name | Qty. |
1 | Machine Frame | 1 set |
2 | Gantry | 1 set |
3 | Column | 1 set |
4 | Cross beam and Ram | 1 set |
5 | Worktable | 1 set |
6 | Drilling Spindle and headstock | 1 set |
7 | Hydraulic System | 1 set |
8 | Electrical Control System | 1 set |
9 | Centralized Lubrication System | 1 set |
10 | Scrap Removal System | 1 set |
11 | Cooling System | 1 set |
12 | Pneumatic system | 1 set |
3.Main Technical Specifications：
Item | Name | Value |
Maximum Plate Size | L x W | 3000×3000 mm |
Maximum Thickness | 250 mm | |
Work Table | T Slot Width | 28 mm(standard) |
T Slot Direction | Y Axis | |
Loading Weight | 3ton/㎡ | |
Drilling Spindle | Maximum Drilling Diameter | φ80 mm |
Drilling spindle’s Rod Length vs. Hole diameter | ≤10 | |
Maximum Tapping screw | M30 | |
RPM | 30～3000 r/min | |
Spindle Tape | BT50 | |
Spindle motor power | 37kW | |
Maximum Torque n≤750r/min | 470Nm | |
Distance from Spindle bottom surface to the worktable | 280～780 mm （adjustable as per material thickness） | |
Gantry Longitudinal Movement (X Axis) | Max. Travel | 3000 mm |
Movement speed along X axis | 0～16m/min | |
Servo motor power of X axis | 2×3.3kW | |
Spindle Transversal Movement （Y Axis） | Max. Travel | 3000mm |
Movement speed along Y axis | 0～16m/min | |
Servo motor power of X axis | 2.7kW | |
Spindle Feeding Movement （Z Axis） | Max. Travel | 500 mm |
Feeding speed of Z axis | 0～10m/min | |
Servo motor power of Z axis | 4.3kW | |
Positioning accuracy | X axis、Y axis | 0.052mm/full travel |
Repeatable positioning accuracy | X axis、Y axis | 0.033mm/full travel |
Hydraulic system | Hydraulic pump pressure/Flow rate | 15MPa /22L/min |
Hydraulic pump motor power | 5.5 kW | |
Pneumatic system | Compressed air pressure | 0.5 MPa |
Scrap removal and Cooling system | Scrap removal tpe | Plate chain |
Scrap removal Nos. | 2个 | |
Scrap removal speed | 1m/min | |
Motor Power | 2×0.75kW | |
Cooling way | Inner cooling + Outside cooling | |
Max. Pressure | 2MPa | |
Max. Flow rate | 50L/min | |
Electronic system | CNC control system | Siemens 828D |
CNC Axis Nos. | 4 | |
Total power | About 65kW | |
Overall Dimension | L×W×H | About 7.8×6.7×4.1m |
Machine weight | About 30t |
4.Free Accessories list：
No. | Name | Size | Qty. |
1 | Optical edge finder | 1 piece | |
2 | Inner hexagon wrench | 1 set | |
3 | Tool holder and pull stud | Φ40-BT50 | 2 pcs |
4 | Tool holder and pull stud | Φ20-BT50 | 1 piece |
5 | Spare paints | -- | 2 kegs |
5. Work Environment:
1).Power supply： 3 phase 5 lines 380±10%V 50±1HZ
2).Compressed air pressure： ≥0.5MPa
3).Temperature： 0-40°C
4).Humidity： ≤75%
