 |
| Quantity: | |
|---|---|
APM1010ACNC Angle Punching, Shearing and Marking Machine
It is mainly used in the iron tower factory to manufacture angle steel components, and completes punching, shearing to length and marking on the angle steel.
1)Technical specification of APM1010A
Angle size | 40x40x3~100x100x10(material tensile strength Maximum 540MPa) |
Max. raw material angle profile length (m) | 12 |
Max. punching capacity | Φ25.5mm x10mm |
Nominal punching force (kN) | 440 |
Nominal marking force (kN) | 1030 |
Nominal cutting force (kN) | 1100 |
No. of character group (piece) | 4 |
No. of character in each character group (piece) | 18 |
Character size (mm) | 14x10x19 |
Cutting mode | Single-blade shearing |
Range of stadia (mm) | 20~70 (stepless) |
No. of punch on each side | 2 |
Max. feeding speed (m/min) | 60 |
No. of CNC axes (piece) | 3 |
Hydraulic power pack’s cooling way | By Air cooling |
Overall size (m) | 25x7x2.2 |
Total power (kW) | About 31.4 |
Machine weight (kg) | Approx. 13800 |
A. There are four sets of transverse conveyor, infeeding automatically and intermittently
B. Type of programming: keyboard input, USB interface input, floppy disc input.
C. Layout: A or B type
D. Working environment:
Working temperature: 0℃~ 50℃
Power: Three phase four wire system
AC Voltage: 380V
Fluctuation of voltage: ±10%
Frequency: 50 Hz
2) List of accessories and spare parts of APM1010A
No. | Name | Quantity | Remark |
1 | Punches for test run | 12 | Including the part installed in the machine |
2 | Female Dies for test run | 24 | Including the part installed in the machine |
3 | The Upper Blade | 2 | Including the part installed in the machine |
4 | The Lower blade | 4 | Including the part installed in the machine |
5 | C Frame | 5 | Including the part installed in the machine |
6 | Punching pole | 5 | Including the part installed in the machine |
7 | Punch nut | 5 | Including the part installed in the machine |
8 | The Upper Claw | 2 | Including the part installed in the machine |
9 | The Lower Claw | 2 | Including the part installed in the machine |
10 | Springs of Every Parts | 1set | |
11 | Pressure oil can | 1 | |
12 | Air gun | 1 | |
13 | Common tools (including：full set of inner hexangular spanner, 500, 300, 150MM adjustable spanner, two solid spanner, a set of screwdriver) | 1batch | |
14 | Standby paint | 2kegs | Main color and Warning color |
15 | The Wrench for Tightening the Punches | 1 | |
16 | Tools for filling nitrogen | 1 | |
17 | The Drawing for wearing Parts | 2 volume | |
18 | The Drawing for Maintenance | 2volum | |
19 | Quality Certificate, Packing List | 1 volume each | |
20 | Instruction Manual (mechanical part, electric part, hydraulic part) | 2 volume each |
3) List of the Key Outsourced Components of APM1010A
No. | Name | Brand | Manufacture |
1 | AC Servo Motor | Panasonic | Japan |
2 | PLC | Mitsubishi | Japan |
3 | Electromagnetic unloading Valve | ATOS/YUKEN | Italy/Taiwan |
4 | Relief Valve | ATOS/YUKEN | Italy/Taiwan |
5 | Electro-hydraulic directional valve | JUSTMARK | Taiwan |
6 | Dual-connection vane pump | ALBERT | U.S.A |
7 | Manifold | AirTAC | Taiwan |
8 | Air valve | AirTAC | Taiwan
|
9 | Air cylinder | AirTAC | Taiwan |
10 | Duplex | AirTAC | Taiwan |
11 | Computer | Lenovo | China |
APM1010ACNC Angle Punching, Shearing and Marking Machine
It is mainly used in the iron tower factory to manufacture angle steel components, and completes punching, shearing to length and marking on the angle steel.
1)Technical specification of APM1010A
Angle size | 40x40x3~100x100x10(material tensile strength Maximum 540MPa) |
Max. raw material angle profile length (m) | 12 |
Max. punching capacity | Φ25.5mm x10mm |
Nominal punching force (kN) | 440 |
Nominal marking force (kN) | 1030 |
Nominal cutting force (kN) | 1100 |
No. of character group (piece) | 4 |
No. of character in each character group (piece) | 18 |
Character size (mm) | 14x10x19 |
Cutting mode | Single-blade shearing |
Range of stadia (mm) | 20~70 (stepless) |
No. of punch on each side | 2 |
Max. feeding speed (m/min) | 60 |
No. of CNC axes (piece) | 3 |
Hydraulic power pack’s cooling way | By Air cooling |
Overall size (m) | 25x7x2.2 |
Total power (kW) | About 31.4 |
Machine weight (kg) | Approx. 13800 |
A. There are four sets of transverse conveyor, infeeding automatically and intermittently
B. Type of programming: keyboard input, USB interface input, floppy disc input.
C. Layout: A or B type
D. Working environment:
Working temperature: 0℃~ 50℃
Power: Three phase four wire system
AC Voltage: 380V
Fluctuation of voltage: ±10%
Frequency: 50 Hz
2) List of accessories and spare parts of APM1010A
No. | Name | Quantity | Remark |
1 | Punches for test run | 12 | Including the part installed in the machine |
2 | Female Dies for test run | 24 | Including the part installed in the machine |
3 | The Upper Blade | 2 | Including the part installed in the machine |
4 | The Lower blade | 4 | Including the part installed in the machine |
5 | C Frame | 5 | Including the part installed in the machine |
6 | Punching pole | 5 | Including the part installed in the machine |
7 | Punch nut | 5 | Including the part installed in the machine |
8 | The Upper Claw | 2 | Including the part installed in the machine |
9 | The Lower Claw | 2 | Including the part installed in the machine |
10 | Springs of Every Parts | 1set | |
11 | Pressure oil can | 1 | |
12 | Air gun | 1 | |
13 | Common tools (including：full set of inner hexangular spanner, 500, 300, 150MM adjustable spanner, two solid spanner, a set of screwdriver) | 1batch | |
14 | Standby paint | 2kegs | Main color and Warning color |
15 | The Wrench for Tightening the Punches | 1 | |
16 | Tools for filling nitrogen | 1 | |
17 | The Drawing for wearing Parts | 2 volume | |
18 | The Drawing for Maintenance | 2volum | |
19 | Quality Certificate, Packing List | 1 volume each | |
20 | Instruction Manual (mechanical part, electric part, hydraulic part) | 2 volume each |
3) List of the Key Outsourced Components of APM1010A
No. | Name | Brand | Manufacture |
1 | AC Servo Motor | Panasonic | Japan |
2 | PLC | Mitsubishi | Japan |
3 | Electromagnetic unloading Valve | ATOS/YUKEN | Italy/Taiwan |
4 | Relief Valve | ATOS/YUKEN | Italy/Taiwan |
5 | Electro-hydraulic directional valve | JUSTMARK | Taiwan |
6 | Dual-connection vane pump | ALBERT | U.S.A |
7 | Manifold | AirTAC | Taiwan |
8 | Air valve | AirTAC | Taiwan
|
9 | Air cylinder | AirTAC | Taiwan |
10 | Duplex | AirTAC | Taiwan |
11 | Computer | Lenovo | China |
