 |
| Quantity: | |
|---|---|
1.Technical specification of APM1010S
Item | Parameter | |
Angle size | 40x40x3mm-100x100x10mm （Material Number Q345, Max. tensile strength up to 550MPa） | |
Nominal Marking force | 1030KN | |
Nominal Punching force | 950KN | |
Nominal Cutting force | 1100KN | |
Punching tool position Nos. | 6 Nos. (both sides 3 Nos. each) | |
Max. punching capacity | For left and right punch: φ25.6mm（Round hole） | |
For middle punch: 22x50mm（Oval hole） | ||
Max. raw material angle profile length | 12m | |
No. of character cassette | 4 | |
No. of character in each character cassette | 18 | |
Character size | 14x10x19mm | |
Shearing method | Single Blade Shearing | |
Cooling method | Oil Chiller | |
Precision | Meet GB/T 2694-2010 requirements | |
Overall size | About 27x7x2.2m | |
Type of programming: Keyboard input, USB interface input. It can connect with TEKLA software.
2. List of accessories and spare parts of APM1010S
No. | Name | Quantity | Remark |
1 | Punches for test run | 12 | Including the part installed in the machine |
2 | Female dies for test run | 18 | |
3 | The upper blade | 2 | |
4 | The short lower blade | 2 | |
5 | The long lower blade | 2 | |
6 | C Frame | 7 | |
7 | Punching pole | 7 | |
8 | Punch nut | 7 | |
9 | The upper claw | 2 | |
10 | The lower claw | 2 | |
11 | Springs of every parts | 1set | |
12 | Pressure oil can | 1 | |
13 | Air gun | 1 | |
14 | Common tools | 1batch | |
15 | Standby paint | 2kegs | Main color and Warning color |
16 | The Wrench for tightening the punches | 1 | |
17 | The Drawing for wearing Parts | 2 volume | |
18 | The Drawing for Maintenance | 2volum | |
19 | Quality Certificate, Packing List | 1 volume each | |
20 | Instruction Manual (mechanical part, electric part, hydraulic part) | 2 volume each | |
21 | Marking Character (A~Z) | 2 sets | |
22 | Marking Character (0~9) | 2 sets |
3. Main outsourcing components list of APM1010S
No. | Name | Brand | Manufacture |
1 | AC Servo Motor | Panasonic | Japan |
2 | PLC | Mitsubishi | Japan |
3 | Electromagnetic unloading Valve | ATOS/YUKEN | Italy/ Taiwan |
4 | Relief Valve | ATOS/YUKEN | Italy/Taiwan |
5 | Electro-hydraulic directional valve | JUSTMARK | Taiwan, China |
6 | Dual-connection vane pump | ALBERT | U.S.A |
7 | Manifold | SMC | Japan |
8 | Air valve | SMC | Japan |
9 | Air cylinder | SMC | Japan |
10 | FRL | SMC | Japan |
Note: The above is our standard supplier. It’s subject to be replaced by other brand with same quality level in case of lack due to special reason.
1.Technical specification of APM1010S
Item | Parameter | |
Angle size | 40x40x3mm-100x100x10mm （Material Number Q345, Max. tensile strength up to 550MPa） | |
Nominal Marking force | 1030KN | |
Nominal Punching force | 950KN | |
Nominal Cutting force | 1100KN | |
Punching tool position Nos. | 6 Nos. (both sides 3 Nos. each) | |
Max. punching capacity | For left and right punch: φ25.6mm（Round hole） | |
For middle punch: 22x50mm（Oval hole） | ||
Max. raw material angle profile length | 12m | |
No. of character cassette | 4 | |
No. of character in each character cassette | 18 | |
Character size | 14x10x19mm | |
Shearing method | Single Blade Shearing | |
Cooling method | Oil Chiller | |
Precision | Meet GB/T 2694-2010 requirements | |
Overall size | About 27x7x2.2m | |
Type of programming: Keyboard input, USB interface input. It can connect with TEKLA software.
2. List of accessories and spare parts of APM1010S
No. | Name | Quantity | Remark |
1 | Punches for test run | 12 | Including the part installed in the machine |
2 | Female dies for test run | 18 | |
3 | The upper blade | 2 | |
4 | The short lower blade | 2 | |
5 | The long lower blade | 2 | |
6 | C Frame | 7 | |
7 | Punching pole | 7 | |
8 | Punch nut | 7 | |
9 | The upper claw | 2 | |
10 | The lower claw | 2 | |
11 | Springs of every parts | 1set | |
12 | Pressure oil can | 1 | |
13 | Air gun | 1 | |
14 | Common tools | 1batch | |
15 | Standby paint | 2kegs | Main color and Warning color |
16 | The Wrench for tightening the punches | 1 | |
17 | The Drawing for wearing Parts | 2 volume | |
18 | The Drawing for Maintenance | 2volum | |
19 | Quality Certificate, Packing List | 1 volume each | |
20 | Instruction Manual (mechanical part, electric part, hydraulic part) | 2 volume each | |
21 | Marking Character (A~Z) | 2 sets | |
22 | Marking Character (0~9) | 2 sets |
3. Main outsourcing components list of APM1010S
No. | Name | Brand | Manufacture |
1 | AC Servo Motor | Panasonic | Japan |
2 | PLC | Mitsubishi | Japan |
3 | Electromagnetic unloading Valve | ATOS/YUKEN | Italy/ Taiwan |
4 | Relief Valve | ATOS/YUKEN | Italy/Taiwan |
5 | Electro-hydraulic directional valve | JUSTMARK | Taiwan, China |
6 | Dual-connection vane pump | ALBERT | U.S.A |
7 | Manifold | SMC | Japan |
8 | Air valve | SMC | Japan |
9 | Air cylinder | SMC | Japan |
10 | FRL | SMC | Japan |
Note: The above is our standard supplier. It’s subject to be replaced by other brand with same quality level in case of lack due to special reason.
