APM1616CNC Punching, Shearing and Marking
Machine for Angles
It is mainly used in the iron tower factory to manufacture angle steel components, and completes punching, fixed-length shearing and marking on the angle steel.
Technical specification of APM1616
Model | APM1616 | |||
Angle Size (mm) | 40x40x4~160x160x16 | |||
Max. Angle Raw Material length (m) | 12 | |||
Max. punching capacity | Φ25.5mm x16mm | |||
Nominal punching force (kN) | 950 | |||
Nominal marking force (kN) | 1030 | |||
Nominal cutting force (kN) | 3000 | |||
Cutting Mode | Single Blade Shearing | |||
No. of character group (piece) | 4 | |||
No. of character in each character group (piece) | 18 | |||
Character size (mm) | 14x10x19 | |||
Range of back mark value (mm) | 20~140 (stepless) | |||
No. of punch on each side (piece) | 3 | |||
Max. feeding speed (m/min) | 60 | |||
No. of CNC axes (piece) | 3 | |||
Cooling way | By air cooling | |||
Overall size (m) (LxWxH) | 26x7x2.2 | |||
Total power (kW) | About 33 | |||
Machine weight (kg) | Approx. 16000 |
Angle feeding Speed: 60m/min, the production efficiency is about 1000 holes/hour
The finished angle conveyor is rotated to one side by pneumatic power. The max. Length of finished angle is 8 m.
There are four cross transversal conveyors which can load the material automatically.
Type of programming: Keyboard input, USB interface input.
Working environment:
Working temperature: 0~ 40℃
Power: Three phase four wire system
AC Voltage: 380V
Fluctuation of voltage: ± 10%
Frequency: 50 Hz
2. List of accessories and spare parts of APM1616
No. | Name | Quantity | Remark |
1 | Punches for test run | 12 | Including the punches installed in the machine |
2 | Female Dies for test run | 24 | Including the parts installed in the machine |
3 | The Upper Blade | 1 | Including the blades installed in the machine |
4 | The Lower blade | 2 | Including the blades installed in the machine |
5 | Die carrier | 7 | Including the parts installed in the machine |
6 | Poles of the Punches | 7 | Including the poles installed in the machine |
7 | Nuts of the Punches | 7 | Including the nuts installed in the machine |
8 | The Upper Claw | 2 | Including the claws installed in the machine |
9 | The Nether Claw | 2 | Including the claws installed in the machine |
10 | Springs of Every Parts | 1set | |
11 | Common tools (including:full set of inner hexangular spanner, 500, 300, 150MM adjustable spanner, two solid spanner, a set of screwdriver) | 1batch | |
12 | Standby paint | 2 kegs | 1 keg for main color and 1 keg for warning color |
13 | The Wrench for Tightening the Punches | 1 | |
14 | Tools for Puff Tools for Puff Tools for Puff Tools for Puff Tools for Puff Tools for Puff | 1 | |
15 | The Drawing for wearing Parts | 2 volumes | |
16 | The Drawing for Maintenance | 2 volums | |
17 | Quality Certificate, Packing List | 1 volume each | |
18 | Instruction Manual (mechanical part, electric part, hydraulic part) | 2 volumes each |
3. Main outsourcing components list of APM1616
No. | Name | Brand | Manufacture |
1 | AC Servo Motor | Panasonic | Japan |
2 | PLC | Mitsubishi | Japan |
3 | Input Module | Mitsubishi | Japan |
4 | Output Module | Mitsubishi | Japan |
5 | Positioning Module | Mitsubishi | Japan |
6 | Towline | JFLO | China |
7 | Electromagnetic unloading valve | ATOS | Italy |
8 | Relief valve | ATOS | Italy |
9 | Electro-hydraulic directional valve | JUSTMARK | Taiwan |
10 | Manifold | AirTAC | Taiwan |
11 | Air valve | AirTAC | Taiwan |
12 | Cylinder | SMC | Japan
|
13 | Duplex | SMC | Japan
|
APM1616CNC Punching, Shearing and Marking
Machine for Angles
It is mainly used in the iron tower factory to manufacture angle steel components, and completes punching, fixed-length shearing and marking on the angle steel.
Technical specification of APM1616
Model | APM1616 | |||
Angle Size (mm) | 40x40x4~160x160x16 | |||
Max. Angle Raw Material length (m) | 12 | |||
Max. punching capacity | Φ25.5mm x16mm | |||
Nominal punching force (kN) | 950 | |||
Nominal marking force (kN) | 1030 | |||
Nominal cutting force (kN) | 3000 | |||
Cutting Mode | Single Blade Shearing | |||
No. of character group (piece) | 4 | |||
No. of character in each character group (piece) | 18 | |||
Character size (mm) | 14x10x19 | |||
Range of back mark value (mm) | 20~140 (stepless) | |||
No. of punch on each side (piece) | 3 | |||
Max. feeding speed (m/min) | 60 | |||
No. of CNC axes (piece) | 3 | |||
Cooling way | By air cooling | |||
Overall size (m) (LxWxH) | 26x7x2.2 | |||
Total power (kW) | About 33 | |||
Machine weight (kg) | Approx. 16000 |
Angle feeding Speed: 60m/min, the production efficiency is about 1000 holes/hour
The finished angle conveyor is rotated to one side by pneumatic power. The max. Length of finished angle is 8 m.
There are four cross transversal conveyors which can load the material automatically.
Type of programming: Keyboard input, USB interface input.
Working environment:
Working temperature: 0~ 40℃
Power: Three phase four wire system
AC Voltage: 380V
Fluctuation of voltage: ± 10%
Frequency: 50 Hz
2. List of accessories and spare parts of APM1616
No. | Name | Quantity | Remark |
1 | Punches for test run | 12 | Including the punches installed in the machine |
2 | Female Dies for test run | 24 | Including the parts installed in the machine |
3 | The Upper Blade | 1 | Including the blades installed in the machine |
4 | The Lower blade | 2 | Including the blades installed in the machine |
5 | Die carrier | 7 | Including the parts installed in the machine |
6 | Poles of the Punches | 7 | Including the poles installed in the machine |
7 | Nuts of the Punches | 7 | Including the nuts installed in the machine |
8 | The Upper Claw | 2 | Including the claws installed in the machine |
9 | The Nether Claw | 2 | Including the claws installed in the machine |
10 | Springs of Every Parts | 1set | |
11 | Common tools (including:full set of inner hexangular spanner, 500, 300, 150MM adjustable spanner, two solid spanner, a set of screwdriver) | 1batch | |
12 | Standby paint | 2 kegs | 1 keg for main color and 1 keg for warning color |
13 | The Wrench for Tightening the Punches | 1 | |
14 | Tools for Puff Tools for Puff Tools for Puff Tools for Puff Tools for Puff Tools for Puff | 1 | |
15 | The Drawing for wearing Parts | 2 volumes | |
16 | The Drawing for Maintenance | 2 volums | |
17 | Quality Certificate, Packing List | 1 volume each | |
18 | Instruction Manual (mechanical part, electric part, hydraulic part) | 2 volumes each |
3. Main outsourcing components list of APM1616
No. | Name | Brand | Manufacture |
1 | AC Servo Motor | Panasonic | Japan |
2 | PLC | Mitsubishi | Japan |
3 | Input Module | Mitsubishi | Japan |
4 | Output Module | Mitsubishi | Japan |
5 | Positioning Module | Mitsubishi | Japan |
6 | Towline | JFLO | China |
7 | Electromagnetic unloading valve | ATOS | Italy |
8 | Relief valve | ATOS | Italy |
9 | Electro-hydraulic directional valve | JUSTMARK | Taiwan |
10 | Manifold | AirTAC | Taiwan |
11 | Air valve | AirTAC | Taiwan |
12 | Cylinder | SMC | Japan
|
13 | Duplex | SMC | Japan
|