 |
| Quantity: | |
|---|---|
PLD3016N
1、Main Technical Specifications
Item | Name | Value |
Size of workpiece | Thickness of workpiece (mm) | Max 100mm |
Width×Length (mm) | 1600mm×3000mm （One piece） | |
1500mm×1600mm (Two pieces) | ||
800mm×1500mm (Four pieces) | ||
Drilling spindle | Quick-change drill chuck | Morse 3＃、4＃ |
Diameter of drilling head (mm) | Φ12mm-Φ50mm | |
The mode of speed adjustment | Transducer stepless speed adjustment | |
Rotate speed (r/min) | 120－560r/min | |
Stroke（mm） | 180mm | |
Processing feeding | Hydraulic stepless speed adjustment | |
Hydraulic clamping | Thickness of clamping(mm) | 15－100mm |
Quantity of clamping cylinder(piece) | 12 pieces | |
Clamping force(kN) | 7.5kN | |
Start-up clamping | Foot-switch | |
Cooling fluid | Mode | Forcing cycle |
Hydraulic system | System pressure(MPa) | 6MPa（60kgf/cm2） |
Volume of oil tank(L) | 100L | |
Air pressure | Source of compressed air(MPa) | 0.6MPa（4kgf/cm2） |
Motor | Spindle (kW) | 5.5kW |
Hydraulic pump (kW) | 2.2kW | |
Chip removal motor(kW) | 0.4kW | |
Cooling pump(kW) | 0.25kW | |
Servo system of X axis(kW) | 1.5kW | |
Servo system of Y axis(kW) | 1.0kW | |
Overall dimensions | L×Wx×H(mm) | About 6183×2700×2850mm |
Weight(KG) | Main machine | About 5000kg |
Scrap Removal Device | About 400kg | |
CNC Axis | X,Y（Point position control）Z(Spindle, Hydraulic feeding) | |
Travel | X Axis | 3000mm |
Y Axis | 1600mm | |
Maximum Positioning speed | 10000mm/min | |
2. List of Free Accessories Parts List
NO. | Code | Name | Qty | Note |
1 | KHQ50.1 | Quick change chuck Quick change chuck | 1 set | Already installed on the spindle |
2 | KHQ50.1－6 | Spindle arbor/Адаптер шпинделя | 2 pcs | |
3 | 4/3 Diameter reducer sleeve/ 4/3Втулка редуктора диаметра | 1 piece | ||
4 | 4/3 Lengthened reducing sleeve | 1 piece | ||
5 | “O”ring 16×2.4mm | 5 pcs | ||
6 | “O”ring 11×1.9mm | 5 pcs | ||
7 | “O”ring 50×3.1mm | 1 piece |
3. List of Key outsourced components
NO. | Name | Brand | Country |
1 | Linear guide rail | CSK/HIWIN | Taiwan (China) |
2 | Hydraulic pump | Just Mark | Taiwan (China) |
3 | Electromagnetic valve | Atos/YUKEN | Italy/Japan |
4 | Servo motor | Mitsubishi | Japan |
5 | Servo driver | Mitsubishi | Japan |
6 | PLC | Mitsubishi | Japan |
7 | Computer | Lenovo | China |
Note: The above is our fixed supplier. It’s subject to be replaced by same quality components of other brand if the above supplier can’t supply the components in case of any special matter.
1、Main Technical Specifications
Item | Name | Value |
Size of workpiece | Thickness of workpiece (mm) | Max 100mm |
Width×Length (mm) | 1600mm×3000mm （One piece） | |
1500mm×1600mm (Two pieces) | ||
800mm×1500mm (Four pieces) | ||
Drilling spindle | Quick-change drill chuck | Morse 3＃、4＃ |
Diameter of drilling head (mm) | Φ12mm-Φ50mm | |
The mode of speed adjustment | Transducer stepless speed adjustment | |
Rotate speed (r/min) | 120－560r/min | |
Stroke（mm） | 180mm | |
Processing feeding | Hydraulic stepless speed adjustment | |
Hydraulic clamping | Thickness of clamping(mm) | 15－100mm |
Quantity of clamping cylinder(piece) | 12 pieces | |
Clamping force(kN) | 7.5kN | |
Start-up clamping | Foot-switch | |
Cooling fluid | Mode | Forcing cycle |
Hydraulic system | System pressure(MPa) | 6MPa（60kgf/cm2） |
Volume of oil tank(L) | 100L | |
Air pressure | Source of compressed air(MPa) | 0.6MPa（4kgf/cm2） |
Motor | Spindle (kW) | 5.5kW |
Hydraulic pump (kW) | 2.2kW | |
Chip removal motor(kW) | 0.4kW | |
Cooling pump(kW) | 0.25kW | |
Servo system of X axis(kW) | 1.5kW | |
Servo system of Y axis(kW) | 1.0kW | |
Overall dimensions | L×Wx×H(mm) | About 6183×2700×2850mm |
Weight(KG) | Main machine | About 5000kg |
Scrap Removal Device | About 400kg | |
CNC Axis | X,Y（Point position control）Z(Spindle, Hydraulic feeding) | |
Travel | X Axis | 3000mm |
Y Axis | 1600mm | |
Maximum Positioning speed | 10000mm/min | |
2. List of Free Accessories Parts List
NO. | Code | Name | Qty | Note |
1 | KHQ50.1 | Quick change chuck Quick change chuck | 1 set | Already installed on the spindle |
2 | KHQ50.1－6 | Spindle arbor/Адаптер шпинделя | 2 pcs | |
3 | 4/3 Diameter reducer sleeve/ 4/3Втулка редуктора диаметра | 1 piece | ||
4 | 4/3 Lengthened reducing sleeve | 1 piece | ||
5 | “O”ring 16×2.4mm | 5 pcs | ||
6 | “O”ring 11×1.9mm | 5 pcs | ||
7 | “O”ring 50×3.1mm | 1 piece |
3. List of Key outsourced components
NO. | Name | Brand | Country |
1 | Linear guide rail | CSK/HIWIN | Taiwan (China) |
2 | Hydraulic pump | Just Mark | Taiwan (China) |
3 | Electromagnetic valve | Atos/YUKEN | Italy/Japan |
4 | Servo motor | Mitsubishi | Japan |
5 | Servo driver | Mitsubishi | Japan |
6 | PLC | Mitsubishi | Japan |
7 | Computer | Lenovo | China |
Note: The above is our fixed supplier. It’s subject to be replaced by same quality components of other brand if the above supplier can’t supply the components in case of any special matter.
