 |
| Quantity: | |
|---|---|
PLD2016N
1、Machine Purpose：
This machine purpose is mainly used for drilling plate workpieces in steel structures such as construction, coaxial, iron tower, etc., and can also be used for drilling tube plates, baffles and circular flanges in boilers, petrochemical industries; the maximum processing thickness is 100mm, Older thin boards can also be stacked in multiple layers for drilling, high efficiency and high precision
This machine purpose can be used for continuous mass production, as well as small batch production of multiple varieties, and can store a large number of workpiece programs. The produced workpieces can be used for processing the same kind of workpieces next time.
1) Technical specification of PLD2016N
Item | Name | Value |
Size of Plate | Thickness of Workpiece (mm) | Max. 100mm |
Length×Width (mm) | 2000mm×1600mm （One piece） | |
1600mm×1000mm (Two pieces) | ||
1000mm×800mm (Four pieces) | ||
Drilling spindle | Quick-change drill chuck | Morse 3＃、4＃ |
Diameter of drilling head (mm) | Φ12mm-Φ50mm | |
The mode of speed adjustment | Transducer stepless speed adjustment | |
Rotate speed (r/min) | 120－560r/min | |
Stroke（mm） | 180mm | |
Processing feeding | Hydraulic stepless speed adjustment | |
Hydraulic clamping | Thickness of clamping(mm) | 15－100mm |
Quantity of clamping cylinder(piece) | 12 pieces | |
Clamping force(kN) | 7.5kN | |
Start-up clamping | Foot-switch | |
Cooling fluid | Mode | Forcing cycle |
Hydraulic system | System pressure (MPa) | 6MPa（60kgf/cm2） |
Volume of oil tank(L) | 100L | |
Air pressure | Source of compressed air (MPa) | 0.4MPa（4kgf/cm2） |
Motor | Spindle (kW) | 5.5kW |
Hydraulic pump (kW) | 2.2kW | |
Chip removal motor(kW) | 0.75kW | |
Cooling pump(kW) | 0.25kW | |
Servo system of X axis(kW) | 1.5kW | |
Servo system of Y axis(kW) | 1.0kW | |
Overall dimensions | L×Wx×H (mm) | About 5183×2705×2856mm |
Weight(KG) | Main machine | About 4500kg |
Scrap Removal Device | About 800kg | |
CNC Axis | X,Y（Point position control）Z(Spindle, Hydraulic feeding) | |
Travel | X Axis | 2000mm |
Y Axis | 1600mm | |
Maximum Positioning speed | 10000mm/min | |
Work Environment：
1、 Power supply：
3 phases 4 lines 380±10%V 60±1HZ (as per order)
2、Environment temperature： 0-40°C
3、Environment humidity： ≤75%
2) List of accessories and spare parts of PLD2016N
NO. | Code | Name | Qty. | Note |
1 | KHQ50.1 | Quick change chuck | 1 set | Already installed on the spindle |
2 | KHQ50.1－6 | Spindle arbor | 2 pcs | |
3 | 4/3 Diameter reducer sleeve | 1 piece | ||
4 | 4/3 Lengthened reducing sleeve | 1 piece | ||
5 | “O”ring 16×2.4mm | 5 pcs | ||
6 | “O”ring 11×1.9mm | 5 pcs | ||
7 | “O”ring 50×3.1mm | 1 piece |
3) List of the Key Outsourced Components of PLD2016N
NO. | Name | Brand | Country |
1 | Linear guide rail | CSK/HIWIN | Taiwan (China) |
2 | Hydraulic pump | Just Mark | Taiwan (China) |
3 | Electromagnetic valve | Atos/Yuken | Italy/Japan |
4 | Servo motor | Mitsubishi | Japan |
5 | Servo driver | Mitsubishi | Japan |
6 | PLC | Mitsubishi | Japan |
7 | Computer | Lenovo | China |
Note: The above is our fixed supplier. It’s subject to be replaced by same quality components of other brand if the above supplier can’t supply the components in case of any special matter.
1、Machine Purpose：
This machine purpose is mainly used for drilling plate workpieces in steel structures such as construction, coaxial, iron tower, etc., and can also be used for drilling tube plates, baffles and circular flanges in boilers, petrochemical industries; the maximum processing thickness is 100mm, Older thin boards can also be stacked in multiple layers for drilling, high efficiency and high precision
This machine purpose can be used for continuous mass production, as well as small batch production of multiple varieties, and can store a large number of workpiece programs. The produced workpieces can be used for processing the same kind of workpieces next time.
1) Technical specification of PLD2016N
Item | Name | Value |
Size of Plate | Thickness of Workpiece (mm) | Max. 100mm |
Length×Width (mm) | 2000mm×1600mm （One piece） | |
1600mm×1000mm (Two pieces) | ||
1000mm×800mm (Four pieces) | ||
Drilling spindle | Quick-change drill chuck | Morse 3＃、4＃ |
Diameter of drilling head (mm) | Φ12mm-Φ50mm | |
The mode of speed adjustment | Transducer stepless speed adjustment | |
Rotate speed (r/min) | 120－560r/min | |
Stroke（mm） | 180mm | |
Processing feeding | Hydraulic stepless speed adjustment | |
Hydraulic clamping | Thickness of clamping(mm) | 15－100mm |
Quantity of clamping cylinder(piece) | 12 pieces | |
Clamping force(kN) | 7.5kN | |
Start-up clamping | Foot-switch | |
Cooling fluid | Mode | Forcing cycle |
Hydraulic system | System pressure (MPa) | 6MPa（60kgf/cm2） |
Volume of oil tank(L) | 100L | |
Air pressure | Source of compressed air (MPa) | 0.4MPa（4kgf/cm2） |
Motor | Spindle (kW) | 5.5kW |
Hydraulic pump (kW) | 2.2kW | |
Chip removal motor(kW) | 0.75kW | |
Cooling pump(kW) | 0.25kW | |
Servo system of X axis(kW) | 1.5kW | |
Servo system of Y axis(kW) | 1.0kW | |
Overall dimensions | L×Wx×H (mm) | About 5183×2705×2856mm |
Weight(KG) | Main machine | About 4500kg |
Scrap Removal Device | About 800kg | |
CNC Axis | X,Y（Point position control）Z(Spindle, Hydraulic feeding) | |
Travel | X Axis | 2000mm |
Y Axis | 1600mm | |
Maximum Positioning speed | 10000mm/min | |
Work Environment：
1、 Power supply：
3 phases 4 lines 380±10%V 60±1HZ (as per order)
2、Environment temperature： 0-40°C
3、Environment humidity： ≤75%
2) List of accessories and spare parts of PLD2016N
NO. | Code | Name | Qty. | Note |
1 | KHQ50.1 | Quick change chuck | 1 set | Already installed on the spindle |
2 | KHQ50.1－6 | Spindle arbor | 2 pcs | |
3 | 4/3 Diameter reducer sleeve | 1 piece | ||
4 | 4/3 Lengthened reducing sleeve | 1 piece | ||
5 | “O”ring 16×2.4mm | 5 pcs | ||
6 | “O”ring 11×1.9mm | 5 pcs | ||
7 | “O”ring 50×3.1mm | 1 piece |
3) List of the Key Outsourced Components of PLD2016N
NO. | Name | Brand | Country |
1 | Linear guide rail | CSK/HIWIN | Taiwan (China) |
2 | Hydraulic pump | Just Mark | Taiwan (China) |
3 | Electromagnetic valve | Atos/Yuken | Italy/Japan |
4 | Servo motor | Mitsubishi | Japan |
5 | Servo driver | Mitsubishi | Japan |
6 | PLC | Mitsubishi | Japan |
7 | Computer | Lenovo | China |
Note: The above is our fixed supplier. It’s subject to be replaced by same quality components of other brand if the above supplier can’t supply the components in case of any special matter.
