 |
| Quantity: | |
|---|---|
PHD2016S
1.Machine Purpose：
The machine is mainly used for drilling plate in steel structures such as buildings, bridges and iron towers.
This machine tool can be used for mass continuous production, also can be used for multi variety small batch production, and can store a large number of plate program, produced plate, next time out can also process the same kind of plate.
2、Technical Specifications
Specification name | Items | Specification Value | ||
Plate dimension | Material thickness | Max. 100mm | ||
Length x Width | 2000mm×1600mm | |||
Spindle | Spindle tape type | BT50 | ||
Drill hole diameter | Common H.S.S. drill maximum Φ50mm Carbide drill maximum Φ65mm | |||
Carbide drilling depth | ≤3d | |||
Rotate speed | 0－3000r/min | |||
Travel length | 350mm | |||
Spindle motor power | 22KW | |||
Function | Drilling, Tapping and Milling | |||
Clamping system | Clamp thickness | 15－100mm | ||
Clamp cylinder number | 8 | |||
Clamp force | 7.5kN | |||
Clamp start | Foot switch | |||
Hydraulic | Clamp pressure | 6MPa（60kgf/cm2） | ||
Capacity of tank | 100L | |||
Air pressure | Compressed air pressure | 0.8MPa | ||
Hydraulic pump | 2.2 kW | |||
X axis servo system | 2×2.0 kW | |||
Y axis servo system | 2.0 kW | |||
Z axis servo system | 2.0 KW | |||
Chip conveyor | 0.75 kW | |||
CNC Control axis number | X Y axis | |||
Z (main spindle) | Servo feed | |||
Travel range | X axis | 2000mm | ||
Y axis | 1600mm | |||
Z axis | 350mm | |||
Maximum positioning speed | 10000mm/min | |||
Machine Weight | About 13500KGS | |||
3. List of accessories and spare parts
NO | Code | Name | Quantity | Remark |
1 | BT50-M4-75 | Tool holder | 1 | |
2 | BT50-XP40-125 | Tool holder | 1 | |
3 | BT50-I | Pull nail | 2 | |
4 | “O” ring 16×2.4mm | 5 pcs | ||
5 | “O” ring 11×1.9mm | 5 pcs | ||
6 | “O” ring 50×3.1mm | 1 piece |
4. List of the Key Outsourced Components
NO. | Name | Brand | Country |
1 | Linear guide rail | HTPM/HIWIN | Taiwan (China) |
2 | Hydraulic pump | Just Mark | Taiwan (China) |
3 | Electromagnetic hydraulic valve | Atos/YUKEN | Italy/Japan |
4 | Servo motor | Mitsubishi/Siemens | Japan/Germany |
5 | Servo driver | Mitsubishi/Siemens | Japan/Germany |
6 | CNC Control System | Mitsubishi/Siemens | Japan/Germany |
7 | Spindle | Kenturn | Taiwan(China) |
Note: The above is our fixed supplier. It’s subject to be replaced by same quality components of other brand if the above supplier can’t supply the components in case of any special matter
5. Work Environment：
1、Power supply：3 phases 4 lines 415±10%V 50±1HZ
Or as per order
2、Environment temperature： 0~40°C
3、Environment humidity： ≤75%
1.Machine Purpose：
The machine is mainly used for drilling plate in steel structures such as buildings, bridges and iron towers.
This machine tool can be used for mass continuous production, also can be used for multi variety small batch production, and can store a large number of plate program, produced plate, next time out can also process the same kind of plate.
2、Technical Specifications
Specification name | Items | Specification Value | ||
Plate dimension | Material thickness | Max. 100mm | ||
Length x Width | 2000mm×1600mm | |||
Spindle | Spindle tape type | BT50 | ||
Drill hole diameter | Common H.S.S. drill maximum Φ50mm Carbide drill maximum Φ65mm | |||
Carbide drilling depth | ≤3d | |||
Rotate speed | 0－3000r/min | |||
Travel length | 350mm | |||
Spindle motor power | 22KW | |||
Function | Drilling, Tapping and Milling | |||
Clamping system | Clamp thickness | 15－100mm | ||
Clamp cylinder number | 8 | |||
Clamp force | 7.5kN | |||
Clamp start | Foot switch | |||
Hydraulic | Clamp pressure | 6MPa（60kgf/cm2） | ||
Capacity of tank | 100L | |||
Air pressure | Compressed air pressure | 0.8MPa | ||
Hydraulic pump | 2.2 kW | |||
X axis servo system | 2×2.0 kW | |||
Y axis servo system | 2.0 kW | |||
Z axis servo system | 2.0 KW | |||
Chip conveyor | 0.75 kW | |||
CNC Control axis number | X Y axis | |||
Z (main spindle) | Servo feed | |||
Travel range | X axis | 2000mm | ||
Y axis | 1600mm | |||
Z axis | 350mm | |||
Maximum positioning speed | 10000mm/min | |||
Machine Weight | About 13500KGS | |||
3. List of accessories and spare parts
NO | Code | Name | Quantity | Remark |
1 | BT50-M4-75 | Tool holder | 1 | |
2 | BT50-XP40-125 | Tool holder | 1 | |
3 | BT50-I | Pull nail | 2 | |
4 | “O” ring 16×2.4mm | 5 pcs | ||
5 | “O” ring 11×1.9mm | 5 pcs | ||
6 | “O” ring 50×3.1mm | 1 piece |
4. List of the Key Outsourced Components
NO. | Name | Brand | Country |
1 | Linear guide rail | HTPM/HIWIN | Taiwan (China) |
2 | Hydraulic pump | Just Mark | Taiwan (China) |
3 | Electromagnetic hydraulic valve | Atos/YUKEN | Italy/Japan |
4 | Servo motor | Mitsubishi/Siemens | Japan/Germany |
5 | Servo driver | Mitsubishi/Siemens | Japan/Germany |
6 | CNC Control System | Mitsubishi/Siemens | Japan/Germany |
7 | Spindle | Kenturn | Taiwan(China) |
Note: The above is our fixed supplier. It’s subject to be replaced by same quality components of other brand if the above supplier can’t supply the components in case of any special matter
5. Work Environment：
1、Power supply：3 phases 4 lines 415±10%V 50±1HZ
Or as per order
2、Environment temperature： 0~40°C
3、Environment humidity： ≤75%
