 |
| Quantity: | |
|---|---|
BHD1005/3
1. Machine Purpose:
This machine tool is mainly used for drilling H-beam, channel steel and other workpieces. The positioning and feeding of the three drilling headstock are all driven by servo motor, controlled by PLC system, and fed by CNC trolley. It is highly efficient and accurate, and can be widely used in construction, bridge and other industries.
2. Main Technical specification
Working Material | H-beam Section size | Section Height H: 150~1000mm Flange width B: 75 ~500mm |
Maximum thickness of H beam | 60mm | |
Raw material Length Maximum | 12m | |
Drilling Spindle | Quantity | 3 |
Max. drilling diameter | Carbide drill: ø 33mm High speed twist drill: ø 40mm | |
Spindle taper hole | BT40 | |
Spindle motor power | 3×11KW | |
Spindle speed (stepless speed regulation) | 0～2000r/min | |
CNC axis | Numbers | 7 |
Motor Power | Servo motor power of fixed side, moving side and middle side feed shaft | 3×2KW |
Fixed side, moving side, middle side, moving side positioning axis servo motor power | 3×1.5KW | |
CNC Axis move speed | Moving speed of three positioning CNC axes | 0～10m/min |
Moving speed of three feed CNC axes | 0～5m/min | |
Travel | Width detection travel | 900mm |
Web detection travel | 290mm | |
Feeding trolley | Feeding trolley servo motor power | 5 KW |
Maximum feeding speed | 20m/min | |
Maximum feeding weight | 8Ton | |
Spray cooling system | Number of nozzles | 1 |
Compressed air pressure | 0.5 MPa | |
Cooling mode | Internal cooling + external cooling | |
Overall dimension of the machine (L x W x H) | About 58×2.2×3.3m | |
Machine weight | About 18000Kg |
3. List of accessories and spare parts
NO. | Code | Name | Quantity | Remark |
1 | HTD-605-5M-30 | Synchronous belt | 2 | |
2 | HTD-1016-8M-70 | Synchronous belt | 1 | |
3 | JB/GQ0341-89 | Pipe joint 12.5 | 1 | |
4 | ZBJ51002-87 | Hoop 25 | 1 | |
5 | FAX-100*20 | filter element | 1 | |
6 | HFH2-P1-3-P-1.5m | High pressure hose assembly | 1 | |
7 | YN-60 | Pressure gauge | 1 | Haitian |
4. Main outsourcing components list
NO. | Name | Brand | Country |
1 | Spindle | Kenturn | Taiwan, China |
2 | Linear rolling guide rail pair | HIWIN/CSK | Taiwan, China |
3 | Hydraulic pump | Justmark | Taiwan, China |
4 | Solenoid hydraulic valve | ATOS/Yuken | Italy / Japan |
5 | Servo motor | Siemens/ MITSUBISHI | Germany / Japan |
6 | Servo driver | Siemens / MITSUBISHI | Germany / Japan |
7 | PLC | Siemens / MITSUBISHI | Germany / Japan |
8 | Computer | Lenovo | China |
Note: The above is our fixed supplier. It’s subject to be replaced by same quality components of other brand if the above supplier can’t supply the components in case of any special matter.
5. Work Environment:
1).Power supply： 3 phase 4 lines 380±10%V 50±1HZ
or made as per order
2).Compressed air pressure： ≥0.5MPa
3).Temperature： 0-40°C
4).Humidity： ≤75%
1. Machine Purpose:
This machine tool is mainly used for drilling H-beam, channel steel and other workpieces. The positioning and feeding of the three drilling headstock are all driven by servo motor, controlled by PLC system, and fed by CNC trolley. It is highly efficient and accurate, and can be widely used in construction, bridge and other industries.
2. Main Technical specification
Working Material | H-beam Section size | Section Height H: 150~1000mm Flange width B: 75 ~500mm |
Maximum thickness of H beam | 60mm | |
Raw material Length Maximum | 12m | |
Drilling Spindle | Quantity | 3 |
Max. drilling diameter | Carbide drill: ø 33mm High speed twist drill: ø 40mm | |
Spindle taper hole | BT40 | |
Spindle motor power | 3×11KW | |
Spindle speed (stepless speed regulation) | 0～2000r/min | |
CNC axis | Numbers | 7 |
Motor Power | Servo motor power of fixed side, moving side and middle side feed shaft | 3×2KW |
Fixed side, moving side, middle side, moving side positioning axis servo motor power | 3×1.5KW | |
CNC Axis move speed | Moving speed of three positioning CNC axes | 0～10m/min |
Moving speed of three feed CNC axes | 0～5m/min | |
Travel | Width detection travel | 900mm |
Web detection travel | 290mm | |
Feeding trolley | Feeding trolley servo motor power | 5 KW |
Maximum feeding speed | 20m/min | |
Maximum feeding weight | 8Ton | |
Spray cooling system | Number of nozzles | 1 |
Compressed air pressure | 0.5 MPa | |
Cooling mode | Internal cooling + external cooling | |
Overall dimension of the machine (L x W x H) | About 58×2.2×3.3m | |
Machine weight | About 18000Kg |
3. List of accessories and spare parts
NO. | Code | Name | Quantity | Remark |
1 | HTD-605-5M-30 | Synchronous belt | 2 | |
2 | HTD-1016-8M-70 | Synchronous belt | 1 | |
3 | JB/GQ0341-89 | Pipe joint 12.5 | 1 | |
4 | ZBJ51002-87 | Hoop 25 | 1 | |
5 | FAX-100*20 | filter element | 1 | |
6 | HFH2-P1-3-P-1.5m | High pressure hose assembly | 1 | |
7 | YN-60 | Pressure gauge | 1 | Haitian |
4. Main outsourcing components list
NO. | Name | Brand | Country |
1 | Spindle | Kenturn | Taiwan, China |
2 | Linear rolling guide rail pair | HIWIN/CSK | Taiwan, China |
3 | Hydraulic pump | Justmark | Taiwan, China |
4 | Solenoid hydraulic valve | ATOS/Yuken | Italy / Japan |
5 | Servo motor | Siemens/ MITSUBISHI | Germany / Japan |
6 | Servo driver | Siemens / MITSUBISHI | Germany / Japan |
7 | PLC | Siemens / MITSUBISHI | Germany / Japan |
8 | Computer | Lenovo | China |
Note: The above is our fixed supplier. It’s subject to be replaced by same quality components of other brand if the above supplier can’t supply the components in case of any special matter.
5. Work Environment:
1).Power supply： 3 phase 4 lines 380±10%V 50±1HZ
or made as per order
2).Compressed air pressure： ≥0.5MPa
3).Temperature： 0-40°C
4).Humidity： ≤75%
